Zenix anti-dandruff shampoo with tea tree and juniper oilThe Zenix Anti-Dandruff Shampoo (Anti-Dandruff Hair Care Shampoo, 250 ml) is a cleansing shampoo for a scalp prone to dandruff and flaking. The formula combines Piroctone Olamine, Climbazole and salicylic acid with tea tree oil, juniper oil and camphor oil. According to the manufacturer, the shampoo is dermatologically tested.Bothered by visible flakes on your shoulders or a scalp that quickly feels oily? This anti-dandruff shampoo gently cleanses the scalp, helps reduce visible flakes and leaves a fresh feeling. The shampoo is suitable for normal, oily and combination hair and does not weigh hair down.Benefits Helps reduce visible dandruff flakes with regular use With Piroctone Olamine, Climbazole and salicylic acid Tea tree oil for a clean, fresh feeling on the scalp Juniper and camphor oil for a balanced scalp For normal, oily and combination hair Dermatologically tested according to the manufacturer Specifications Brand Zenix Product Anti-Dandruff Hair Care Shampoo Type Anti-dandruff shampoo Contents 250 ml Key ingredients Piroctone Olamine, Climbazole, salicylic acid, tea tree oil, juniper oil, camphor oil Hair type Normal, oily and combination hair EAN 8680075544085 How to use the anti-dandruff shampoo Wet your hair thoroughly. Apply a small amount of shampoo and gently massage into the scalp. Leave on briefly and rinse thoroughly with lukewarm water. Repeat if needed; use regularly for best results. Avoid contact with the eyes. In case of contact, rinse immediately with water.What's in the box1x Zenix Anti-Dandruff Shampoo 250 mlShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhat ingredients are in Zenix anti-dandruff shampoo?The shampoo contains Piroctone Olamine, Climbazole and salicylic acid, combined with tea tree oil, juniper oil and camphor oil.Is this shampoo suitable for oily hair?Yes, the shampoo is suitable for normal, oily and combination hair and does not weigh hair down.How often should I use an anti-dandruff shampoo?Use the shampoo regularly when washing your hair. If symptoms persist, consult your GP or a dermatologist.Can I use the shampoo on a sensitive scalp?The shampoo was developed with sensitive scalps in mind and is dermatologically tested according to the manufacturer. Stop using it if irritation occurs.Take a look at the other products in our beauty and personal care collection.

Read more less

Titanium replacement blades for Husqvarna Automower and Gardena robotic mowersThese titanium replacement blades for Husqvarna Automower and Gardena robotic mowers are a set of 30 compatible blades with 30 matching screws. The blades are made of stainless steel with a titanium coating that helps prevent rust. It's an affordable supply to keep your robotic mower cutting sharply all season long.Blunt robotic mower blades tear the grass instead of cutting it cleanly, leaving the blades of grass frayed and brown. With these replacement blades for your Automower or Gardena robotic mower you can swap the blades in good time and keep your lawn neat. Because each set contains 30 blades, you can change them several times without having to reorder.Benefits 30 replacement blades and 30 screws in one set Stainless steel with titanium coating against rust Galvanised screws included Sharp cut for a neat and healthy lawn Enough for several blade changes per season Compatible with Husqvarna Automower and Gardena robotic mowers Specifications Brand ZenXstore (compatible part, not original) Type Replacement blades for robotic mower Quantity 30 blades + 30 screws Material Stainless steel with titanium coating Screws Galvanised Compatible with Husqvarna Automower and Gardena robotic mowers EAN 9504616656961 How to replace the bladesAlways switch off the robotic mower and activate the lock (for example via the stop button, PIN code or main switch, depending on your model) before tilting the mower or replacing blades. Wear work gloves, as new blades are very sharp, and follow your mower's manual. Unscrew the old screw, remove the old blade and fit the new blade with a new screw. Then check that each blade can rotate freely.Compatible with Husqvarna Automower robotic mowers with separate pivoting blades Gardena robotic mowers with separate pivoting blades What's in the box 30x titanium replacement blade 30x galvanised screw Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsAre these blades compatible with my Husqvarna Automower or Gardena robotic mower?They are intended for Husqvarna Automower and Gardena robotic mowers that use separate pivoting blades on a cutting disc. If in doubt, compare your current blade with the product photo or email us your model number.Are screws included with the replacement blades?Yes, the set contains 30 blades and 30 matching galvanised screws. Replace the screw each time you change a blade.How often should I replace my robotic mower's blades?That depends on your lawn and how often the mower runs. If you see frayed blades of grass or a poorer cutting result, it's time for new blades. Always replace all the blades on the cutting disc at the same time.Are these original Husqvarna blades?No, these are compatible replacement blades from ZenXstore. Husqvarna, Automower and Gardena are trademarks of their respective owners and are mentioned only to indicate compatibility.Also take a look at the other lawn and garden products in our Home & Garden collection.

Read more less

Apple FineWoven case with MagSafe for iPhone 15 Pro MaxThis iPhone 15 Pro Max case is the genuine Apple FineWoven case with MagSafe. FineWoven is a durable micro-twill fabric with a soft, suede-like feel, made from 68 percent recycled material. Thanks to the built-in magnets, the case works with MagSafe chargers and other MagSafe accessories. Choose from Pacific Blue, Black, Taupe, Mulberry and Evergreen.Please note: the cases are brand new and come in the original Apple retail packaging, but the packaging is not sealed. That is why we can offer this iPhone 15 Pro Max case for less than in the shops. The case clips on easily and adds very little bulk, so your iPhone stays slim in your pocket or bag.Benefits Genuine Apple case, new in retail packaging Built-in MagSafe magnets for chargers, car mounts and accessories Soft, durable micro-twill fabric (FineWoven) Made from 68 percent recycled material Precise fit for the iPhone 15 Pro Max, adds minimal bulk Five colours: Pacific Blue, Black, Taupe, Mulberry and Evergreen Specifications Brand Apple Model FineWoven case with MagSafe Compatible with iPhone 15 Pro Max Material FineWoven micro-twill, 68% recycled material MagSafe Yes, built-in magnets Colours Pacific Blue, Black, Taupe, Mulberry, Evergreen Condition New, retail packaging not sealed EAN Pacific Blue 0194253945932 EAN Black 0194253945840 EAN Taupe 0194253945871 EAN Mulberry 0194253945901 EAN Evergreen 0194253945963 Compatible withThis case is made exclusively for the iPhone 15 Pro Max. It does not fit the iPhone 15 Pro, iPhone 15 Plus or the iPhone 16 series properly, as the dimensions and the position of the camera and buttons differ.What's in the box1x Apple FineWoven case with MagSafe for iPhone 15 Pro MaxShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs this a genuine Apple FineWoven case?Yes, it is a new, genuine Apple FineWoven case in its retail packaging. Only the seal on the packaging is missing.Does this case fit the iPhone 15 Pro or iPhone 16 Pro Max?No, this case is made exclusively for the iPhone 15 Pro Max.Can I charge wirelessly with the case on?Yes, thanks to the MagSafe magnets, MagSafe and Qi chargers work right through the case.Which colours are available?The case comes in Pacific Blue, Black, Taupe, Mulberry and Evergreen. Availability varies by colour.Take a look at our other chargers and electronics.

Read more less

Dyson Airstrait: the straightener that dries and styles your hair in one stepThe Dyson Airstrait is a wet-to-dry hair straightener that uses a focused airflow to dry and straighten your hair at the same time, without hot plates. Use it directly on towel-dried hair, or on dry hair for a touch-up. It runs at 1,600 W with an airflow of 11.9 l/s and three heat settings: 80, 110 and 140 °C.Normally you blow-dry your hair first and then reach for the straightener. The Airstrait combines those two steps: slowly glide it through a section of wet hair and the airflow from both arms dries and straightens it at the same time. According to Dyson, glass bead thermistors measure the airflow temperature up to 16 times per second. Choose from three colours: Nickel/Copper, Prussian Blue/Copper and Ceramic Pink/Rose Gold.Benefits Dry and straighten in one step, straight from wet hair Styles with airflow instead of hot plates Two modes: wet-to-dry and dry for touch-ups Three heat settings (80, 110, 140 °C) and adjustable airflow Pauses automatically after three seconds without movement LCD screen, lock function and negative ions to reduce frizz Specifications Brand Dyson Model Airstrait wet-to-dry hair straightener Part number Nickel/Copper 408202-01 · Prussian Blue/Copper 408215-01 · Ceramic Pink/Rose Gold 598960-01 Power 1,600 W, 220-240 V Airflow 11.9 l/s Temperatures 80 °C, 110 °C, 140 °C Modes Wet-to-dry and dry Weight 0.935 kg Dimensions 330 x 41 x 60 mm Colours Nickel/Copper, Prussian Blue/Copper, Ceramic Pink/Rose Gold Condition New EAN Nickel/Copper 5025155070581 EAN Ceramic Pink/Rose Gold 5025155113080 How to use the Dyson Airstrait After washing, towel-dry your hair until it no longer drips. Select wet-to-dry mode and a temperature that suits your hair. Work in sections: clamp a section between the arms and slowly glide the Airstrait from root to tip. Use dry mode on dry hair for finishing or a quick touch-up during the day. What's in the box 1x Dyson Airstrait wet-to-dry hair straightener 1x heat-resistant non-slip mat Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDo I need to blow-dry my hair before using the Dyson Airstrait?No. Use the Airstrait directly on towel-dried hair in wet-to-dry mode; it dries and straightens at the same time.Does the Dyson Airstrait also work on dry hair?Yes, in dry mode you can use it on dry hair for finishing or a quick touch-up.How is it different from a regular straightener?A regular straightener clamps dry hair between hot plates. The Airstrait straightens with warm air while drying, so you skip the blow-dry step.What heat settings does the Airstrait have?Three: 80 °C, 110 °C and 140 °C. You can also adjust the airflow.Is this Dyson Airstrait new?Yes, this is a new unit, not a refurbished device.Find more hair styling and care products in our Beauty & Personal Care collection.

Read more less

Apple 35W power adapter with two USB-C portsWith the Apple 35W Dual USB-C power adapter you charge two devices at the same time from one wall socket, for example your iPhone and iPad, or your iPhone and MacBook Air. According to Apple, the total output of 35W is automatically shared between the two ports, based on what each device needs.Handy on your desk, in your travel bag or on the bedside table: you no longer need two separate chargers. If you only use one port, that device gets the full power. The adapter works with iPhone, iPad, AirPods, Apple Watch and Mac laptops, as well as other USB-C devices.Benefits Two USB-C ports, 35W combined Charges two devices at the same time Power is shared automatically For iPhone, iPad, AirPods, Apple Watch and MacBook Air Compact and travel-friendly Original Apple adapter Specifications Brand Apple Model 35W Dual USB-C Port Power Adapter Total power 35W, shared across 2 ports Ports 2x USB-C Colour White Cable Not included EAN 194253337331 How the power is sharedWhen you connect two devices, the adapter shares the 35W automatically. According to Apple, a Mac and an iPhone, for example, each get up to 17.5W. With a Mac or iPhone together with an Apple Watch or AirPods, up to 27.5W goes to the Mac or iPhone and 7.5W to the smaller device.What's in the box1x Apple 35W Dual USB-C power adapterShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes the Apple 35W adapter come with a cable?No, just the adapter. Use your own USB-C cable or USB-C to Lightning cable.Can I charge my MacBook Air with it?Yes, a MacBook Air charges well at 35W. If you charge a second device at the same time, the power is shared and charging takes a little longer.Does fast charging work on my iPhone?Yes, iPhones that support fast charging charge quickly via USB-C, even when the power is shared across two ports.Also take a look at our other chargers and electronics.

Read more less

Replacement blades for Robomow RC, RS, MC and TC – duo packThis duo pack of replacement blades for Robomow contains two steel blades compatible with the Robomow RC, RS, MC, MS, TC, TS and City MC series. According to the supplier's data, they also fit the Wolf-Garten Loopo M. With two blades in one pack, you always have a spare ready.A sharp Robomow blade cuts the grass cleanly, while a blunt or damaged blade tears the blades of grass. You can see this as brown tips on the lawn. By replacing your robot mower blade in good time, your lawn stays neat and the mower works more efficiently. If your model has two cutting motors, replace both blades at the same time.Benefits Two steel replacement blades in one pack Compatible with Robomow RC, RS, MC, MS, TC, TS and City MC Clean cut for a healthy lawn Always a spare blade to hand Ideal for replacing both blades at once Specifications Brand ZenXstore (compatible part, not original) Type Replacement blade for robot mower Quantity 2 blades (duo pack) Material Steel Compatible with Robomow RC, RS, MC, MS, TC, TS and City MC; Wolf-Garten Loopo M (according to supplier) EAN 8720387803798 Compatible with Robomow RC series Robomow RS series Robomow MC series and City MC Robomow MS series Robomow TC and TS series Wolf-Garten Loopo M (according to supplier data) Replacing safelyAlways switch off the robot mower and activate the lock (for example via the stop button, PIN code or main switch, depending on your model) before tilting the mower or replacing blades. Wear work gloves, as new blades are very sharp, and follow your mower's manual.What's in the box2x steel replacement blade for RobomowShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhich Robomow models are these replacement blades compatible with?The blades are compatible with Robomow RC, RS, MC, MS, TC, TS and City MC. According to the supplier's data, they also fit the Wolf-Garten Loopo M.Why are there two blades in the pack?So you always have a spare blade to hand. If your Robomow has two cutting motors, replace both blades at the same time for an even cutting result.How often should I replace my Robomow blade?As a rule of thumb, at least once per season, and sooner if you notice ragged grass or the blade is damaged.Are these original Robomow blades?No, these are compatible replacement blades supplied by ZenXstore. Robomow is only mentioned to indicate which mowers they fit.Also take a look at the other garden and lawn products in our Home & Garden collection.

Read more less

Charger for your e-scooter: Xiaomi M365, Pro 2 and 1SCharger broken, lost or left behind on holiday? With this e-scooter charger you can charge a Xiaomi M365, M365 Pro, Pro 2 or Mi 1S as normal again. It is a compatible replacement charger (not an original Xiaomi product) with a 42V 2A output, exactly the charging voltage the 36V battery of these scooters needs. An LED on the adapter glows red while charging and turns green once the battery is full.Many people also buy this charger as a second unit, so they can keep one at work or school and don't have to carry their charger around all the time. Not sure which model you have? Check the rating plate under the scooter or the label on your old charger. Safety: only use this charger for scooters with a 36V battery. If your old charger shows an output voltage other than 42V, do not use this charger and get in touch with us.Benefits Replaces a broken or lost charger for your Xiaomi M365-series scooter 42V / 2A output for 36V scooter batteries Handy as a second charger for work, school or a holiday address LED shows the charging status: red is charging, green is full Works on 100-240V, so on any European socket Personal advice if you're unsure about your model Specifications Brand ZenXstore (compatible, not an original Xiaomi product) Type Replacement charger for e-scooter Output 42V DC, 2A Input 100-240V AC, 50/60Hz Indicator LED: red = charging, green = full Compatible with Xiaomi M365, M365 Pro, Pro 2, Mi 1S EAN 8720387803996 Compatible with Xiaomi M365 Xiaomi M365 Pro Xiaomi Pro 2 Xiaomi Mi 1S What's in the box1x e-scooter charger 42V 2AShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsHow do I know which Xiaomi scooter I have?The model is shown on the rating plate, usually under the deck or near the handlebar. The Xiaomi Home app also shows which model you have paired. If you have an M365, M365 Pro, Pro 2 or Mi 1S, this charger is compatible. Not sure? Send us a photo of the rating plate.Why 42V when my scooter has a 36V battery?A 36V lithium-ion battery is fully charged at around 42V. A charger therefore has to supply slightly more voltage than the battery's nominal voltage. A 42V charger is the right choice for a 36V scooter such as the M365 series.Is this an original Xiaomi charger?No, it is a compatible replacement charger with the same 42V output voltage. It is compatible with the Xiaomi models listed, but is not made by Xiaomi itself. This way you can charge your scooter again without having to hunt down an expensive original charger.My scooter won't charge – is it the charger?First check the LED. If it stays green while the battery is empty, check the charging port for dirt or moisture and make sure the plug is fully inserted. If the scooter doesn't charge with another charger either, the problem is often the battery or the charging port. Feel free to get in touch with us.You'll find more chargers and parts in our E-mobility collection.

Read more less

20W iPhone fast charger with 1 or 2 metre Lightning cableThis 20W iPhone fast charger set consists of a USB-C adapter and a USB-C to Lightning cable, with a choice of 1 metre or 2 metres. It charges an iPhone or iPad with Lightning to around 50% in about 30 minutes. The adapter is CE certified and has a chip that protects against short circuits, overvoltage, overheating and overcurrent.The 2 metre Lightning cable is handy in bed or on the sofa when the socket is just out of reach. The 1 metre cable is better suited to your desk or bag. You can also use the cable to charge and sync your iPhone or iPad via your laptop's USB-C port. The adapter also works with other USB-C devices.Benefits 20W fast charging via USB-C Choice of 1 or 2 metre Lightning cable Protection against overheating, overvoltage, overcurrent and short circuits CE certified, meets EU safety requirements Cable also supports data transfer with a laptop 12-month warranty Specifications Brand ZenXstore Type USB-C fast charger with cable Power 20W Adapter port USB-C Cable USB-C to Lightning, 1 m or 2 m Protection Overheating, overvoltage, overcurrent, short circuit Certification CE Warranty 12 months EAN adapter + 2 m cable 6094042721713 EAN adapter + 1 m cable 190199370388 Compatible withiPhone 14, 13, 12 and 11 series, iPhone SE, XS, XS Max, XR, X, 8 and 8 Plus; iPad, iPad mini and iPad Air with Lightning port; AirPods with Lightning case. Do you have an iPhone 15 or newer? It uses USB-C, so choose a USB-C to USB-C cable instead.Which cable length should I choose? 2 metres: in bed, on the sofa or when the socket is further away. 1 metre: at your desk, in the car or in your travel bag. What's in the box 1x 20W USB-C fast charger 1x USB-C to Lightning cable (1 m or 2 m, your choice) Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this Lightning cable fit the iPhone 15?No. The iPhone 15 and newer have a USB-C port. This set is for devices with a Lightning port.How fast does my iPhone charge with this 20W fast charger?An iPhone from the iPhone 8 onwards charges to around 50% in about 30 minutes. The exact time depends on the model and battery condition.Which cable length should I choose?Choose 2 metres if your socket is far from your bed or sofa. For a desk, car or travel bag, 1 metre is more practical.Is this fast charger safe for my iPhone?The adapter is CE certified and protects against overheating, overvoltage, overcurrent and short circuits.Also take a look at our other chargers and electronics.

Read more less

Zenix care cream for an even, radiant lookThe Zenix Whitening Cream is a nourishing and moisturising cream for face and body from the Turkish cosmetics brand Zenix. The cream cares for the skin, gives it a fresh look and is intended for an even, radiant complexion. It is suitable for daily use.Use the cream as part of your daily skincare routine, for example after cleansing your face or on dry areas of the body. Because skin is sensitive to sunlight during the day, we recommend combining the care cream with a sunscreen, such as the Zenix SPF cream from our range.Benefits Moisturises and cares for the skin For an even, radiant look Gives the skin a fresh appearance For use on face and body Suitable for daily use Compact packaging, easy to take with you Specifications Brand Zenix Product Whitening Cream (Face & Skincare) Type Care cream Application Face and body Form Cream EAN 8680075543781 How to use the Zenix cream Cleanse and dry the skin. Apply a small amount and massage in gently until absorbed. During the day, use in combination with a sunscreen. For external use only. Avoid contact with the eyes and stop using if the skin becomes irritated. If you have sensitive skin, test on a small patch of skin first.What's in the box1x Zenix Whitening CreamShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs the Zenix cream suitable for daily use?Yes, the cream is intended for daily use on face and body as part of your skincare routine.Where can I use the cream?You can use the cream on your face and body. Avoid the skin around the eyes.Should I also use sunscreen?Yes, we recommend always using a sunscreen during the day for well-protected, even-looking skin.What if my skin reacts sensitively?Test the cream on a small patch of skin first. Stop using it if redness or irritation occurs.Also take a look at the other products in our beauty and personal care collection.

Read more less

Zenix Hair Botox Prokeratin: intensive hair care in a sachetZenix Hair Botox Prokeratin is an intensive conditioning cream for dry, damaged or treated hair, packed in a handy 35 ml sachet. The keratin formula nourishes the hair from ends to roots, leaving it soft and glossy. In our shop the product is also known as Zenix Pre-Keratin Cream and it is suitable for all hair types.Use this hair botox as a standalone conditioning treatment for hair that needs extra nourishment, or as preparation for a keratin treatment. The compact sachet makes it ideal for trying it out first, for a single treatment at home or for taking on your travels. Hairdressers like to use this format for one treatment per client.Benefits Intensive care for dry and damaged hair Keratin formula that nourishes hair from ends to roots For visibly more shine and a soft hair texture Suitable for all hair types, including coloured or treated hair Ideal as a pre-treatment for a keratin treatment Handy 35 ml sachet for home, travel or the salon Specifications Brand Zenix Product Hair Botox Prokeratin (Pre-Keratin Cream) Type Hair treatment / conditioning cream Contents 35 ml Packaging Sachet Hair type All hair types EAN 8680075543576 How to use Zenix Hair Botox Wash your hair and pat it towel-dry. Apply the cream to thin sections, working from the ends towards the roots. Leave the product on, following the time and steps on the packaging. Rinse thoroughly or continue styling according to the instructions for use. Avoid contact with the eyes. In case of contact, rinse immediately with water.What's in the box1x Zenix Hair Botox Prokeratin sachet (35 ml)Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhat is hair botox?Hair botox is a conditioning hair treatment, not an injection. The keratin cream nourishes and softens the hair for more shine and a smoother look.Is Zenix Hair Botox suitable for coloured hair?Yes, the product was developed for all hair types, including dry, coloured or treated hair that needs extra care.How many treatments do you get from a 35 ml sachet?That depends on the length and thickness of your hair. For short to medium-length hair, one sachet is usually enough for one treatment.Can I use it for a keratin treatment?Yes, you can use it as a pre-treatment for a keratin treatment or as a standalone conditioning treatment.Also take a look at the other products in our beauty and personal care collection.

Read more less

Fatboy Tablet Tuxedo: tablet sleeve for iPad and other tabletsThe Fatboy Tablet Tuxedo is a universal tablet sleeve with a nylon exterior and a soft neoprene interior that absorbs knocks. The sleeve measures 28.5 x 22 x 4 cm and weighs approximately 200 grams. It fits the iPad Pro 11 inch, iPad Air 10.9 inch, iPad 10.2 inch and iPad mini, among others, as well as Samsung and Lenovo tablets of that size.Slide your tablet in and carry it safely in your bag – to school, the office or on your travels. The sleeve protects against scratches, dust and splashes and has the playful Fatboy look. Choose your colour: orange, pink or green.Benefits Universal iPad sleeve for tablets up to about 11 inches Nylon exterior, soft neoprene interior Protects against knocks, scratches, dust and splashes Lightweight: approximately 200 grams Easy to clean Distinctive Fatboy design in three colours Specifications Brand Fatboy Model Tablet Tuxedo Type Tablet sleeve Sleeve dimensions 28.5 x 22 x 4 cm Material Nylon (outside), neoprene (inside) Weight approx. 200 grams Colours Orange, pink, green EAN orange 9503956379455 EAN pink 9504542187911 EAN green 9504359227459 Compatible with Apple iPad Pro 11 inch Apple iPad Air 10.9 inch Apple iPad 10.2 inch and iPad up to 10th generation Apple iPad mini 8.3 inch Samsung Galaxy Tab 8 inch Lenovo Tab M10, M11 and P11 Not sure? Measure your tablet: devices smaller than the outer dimensions of 28.5 x 22 cm usually fit, with some room for the neoprene lining.What's in the box1x Fatboy Tablet Tuxedo tablet sleeveShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWill my iPad fit in the Fatboy Tablet Tuxedo?The sleeve fits the iPad Pro 11 inch, iPad Air 10.9 inch, iPad 10.2 inch and iPad mini, among others. It is too small for an iPad Pro 12.9 or 13 inch.Is the tablet sleeve water-repellent?The nylon exterior protects against dust and splashes. Do not submerge the sleeve or leave it out in the rain.How do I clean the sleeve?With a soft cloth, lukewarm water and a little liquid soap if needed. Do not use alcohol or ammonia.Can I also fit a small laptop in it?Only if it is smaller than about 28.5 x 22 cm; most laptops are too large for it.Also take a look at our electronics and charging collection.

Read more less

Zenix Men Series hair wax with strong hold and matte finishThe Zenix Men Series hair wax gives your hair instant volume, texture and a matte finish without a sticky feel. It offers a strong hold with a natural result and doesn't weigh your hair down. Choose the variant that suits your hair type: Curly, Dry, Normal or Straight.Whether your hair is curly, dry, normal or straight, the right variant lets you quickly style a natural look that lasts. The wax is easy to apply and to restyle throughout the day. Thanks to its compact size, it also fits easily in your wash bag.Benefits Strong hold with a natural, matte result Instant volume and texture Not sticky and doesn't weigh hair down Easy to apply and restyle Variants for curly, dry, normal and straight hair Compact size, handy for travel Specifications Brand Zenix Series Men Series Type Hair wax / styling product Hold Strong Finish Matte Variants Curly, Dry, Normal, Straight EAN Curly 6094034756716 EAN Dry 6094030668693 EAN Normal 6094036920955 EAN Straight 6094032446473 Which variant should I choose? Curly: for curly or wavy hair. Dry: for dry hair. Normal: for normal hair. Straight: for straight hair. How to use: take a small amount, spread it through your hair and style with your fingers or a comb. Follow the instructions on the packaging and avoid contact with the eyes.What's in the box1x Zenix Men Series hair wax in the chosen variantShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhich Zenix variant suits my hair?Choose Curly for curly hair, Dry for dry hair, Normal for normal hair and Straight for straight hair.Does this wax give a shiny or matte result?The Zenix Men Series wax gives a matte finish with a natural look, without a greasy shine.Can I restyle my hair during the day?Yes, the wax is easy to restyle, so you can refresh your look throughout the day.Is the wax sticky?No, the wax doesn't feel sticky and doesn't weigh your hair down.Also take a look at the other products in our beauty and personal care collection.

Read more less

GARDENA Classic Twist lawn sprinkler with 4 spray patternsThe GARDENA Classic Twist lawn sprinkler (item number 2068-20) waters four different shapes: circle, semicircle, square and rectangle. You choose the spray pattern with the twist knob on the sprinkler. Depending on the pattern, it covers an area of up to 100 m², ideal for small and medium-sized lawns. The matching GARDENA hose connector (art. 915) is included.The sprinkler sits on a ground spike that you push firmly into the lawn or border. Does another patch of grass need water? Pull it out of the ground and put it somewhere else. With the rectangular pattern you water a narrow strip along the patio without wetting the paving or the house wall; with the semicircle you can place the sprinkler at the edge of the lawn.Benefits Four spray patterns in one lawn sprinkler: circle, semicircle, square, rectangle Choose the pattern with a simple twist knob Waters up to 100 m² depending on the pattern Ground spike for a secure position in the grass Includes matching GARDENA hose connector (art. 915) Easy to move to another part of the garden Specifications Brand GARDENA Model Classic Four-Area Sprinkler Twist Item number 2068-20 Spray patterns Circle, semicircle, square, rectangle Area circle 10 to 80 m² Area semicircle 8 to 100 m² Area square 8 to 62 m² Area rectangle 16 to 32 m² Mounting Ground spike Included GARDENA hose connector art. 915 EAN 4078500206808 How to use the lawn sprinkler Click the supplied connector onto your garden hose and connect it to the sprinkler. Push the sprinkler into the lawn using the ground spike. Use the twist knob to choose the pattern that suits the shape of your lawn. Turn on the tap and adjust the position or pattern if needed. What's in the box 1x GARDENA Classic Twist lawn sprinkler (2068-20) 1x GARDENA hose connector (art. 915) Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsHow large an area does the GARDENA Twist lawn sprinkler water?That depends on the pattern: circle 10 to 80 m², semicircle 8 to 100 m², square 8 to 62 m² and rectangle 16 to 32 m².Which spray pattern should I choose for a narrow lawn?Choose the rectangular pattern. That way you water an elongated strip without wetting paths or walls.When is the best time to water my lawn?Early in the morning. Less water evaporates then and the grass dries off during the day.Is a hose connector included?Yes, the matching GARDENA hose connector (art. 915) is included.Discover more garden tools and garden watering in our Home & Garden collection.

Read more less

GARDENA NatureCut hedge shears with wooden handlesThe GARDENA NatureCut hedge shears (item number 12300-20) are manual hedge shears with an overall length of 535 mm and 230 mm wavy blades. The wooden handles are 100% FSC certified. The built-in branch cutter lets you cut thicker twigs too, and the shock absorbers between the handles cushion the impact when closing.Manual hedge shears are ideal for trimming hedges, shrubs and ground cover: quiet, with no cable or battery, and always ready to go. The wavy edge holds branches in place while you cut, so they don't slip out of the blades. That way you keep your hedge neatly in shape.Benefits 230 mm wavy blades that hold branches in place Built-in branch cutter for thicker twigs Wooden handles, 100% FSC certified Shock absorbers that cushion the impact when closing Quiet, with no cable or battery needed GARDENA warranty: 2 years plus 23 years manufacturer's warranty Specifications Brand GARDENA Model NatureCut hedge shears Item number 12300-20 Overall length 535 mm Blade length 230 mm Cutting edge Wavy Handles Wood, 100% FSC certified Extras Built-in branch cutter, shock absorbers Warranty 2 + 23 years (GARDENA) EAN 4078500049078 CareAfter use, wipe the blades clean with a cloth and let them dry. Put a drop of oil on the pivot now and then and store the hedge shears in a dry place. That keeps the shears moving smoothly and the wooden handles lasting a long time.What's in the box1x GARDENA NatureCut hedge shearsShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsHow long are the blades of the GARDENA NatureCut hedge shears?The blades are 230 mm long; the overall length of the shears is 535 mm.When should I trim my hedge?Most hedges are trimmed in spring and at the end of summer. Always check first whether birds are nesting in the hedge.Can I also cut thicker branches with them?Yes, for thicker twigs use the built-in branch cutter close to the pivot. For really thick branches, loppers are more practical.How do I keep the blades in good condition?Clean and dry them after use, and treat them with a drop of oil now and then.Discover more garden tools and watering products in our Home & Garden collection.

Read more less

Genuine Apple USB-C charge cable, 2 metresThis genuine Apple 2-metre USB-C charge cable has a USB-C connector on both ends. Use it to charge your iPhone 15 or newer, iPad or MacBook with USB-C via a USB-C adapter, and to transfer data between your devices.At 2 metres long, the cable easily reaches from the socket to your bed, sofa or desk, so you can keep using your device while it charges. A handy spare cable for your bedside, laptop bag or office. Charging speed depends on the adapter and the device; the cable itself does not supply power, so you need a USB-C adapter separately.Benefits Genuine Apple product 2 metres long for extra freedom of movement USB-C on both ends Charging and data transfer For iPhone 15 and newer, iPad and MacBook with USB-C Also works with other USB-C devices Specifications Brand Apple Type USB-C to USB-C charge cable Length 2 metres Function Charging and data Compatible with iPhone 15 and newer, iPad and MacBook with USB-C, other USB-C devices EAN 888462698429 Compatible with iPhone 15, iPhone 16 and newer iPhones with USB-C iPad, iPad Air, iPad mini and iPad Pro with USB-C MacBook Air and MacBook Pro with USB-C Other smartphones, tablets and laptops with USB-C What's in the box1x Apple USB-C charge cable 2 mShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this cable fit my iPhone 14?No, the iPhone 14 and older have a Lightning port. This cable is for devices with USB-C, such as the iPhone 15 and newer.Will my iPhone charge faster with this cable?Charging speed is mainly determined by the adapter and your device. Use a USB-C adapter of at least 20 W to fast-charge your iPhone.Is an adapter included?No, you only get the cable. You need a USB-C adapter separately.Can I also transfer data with this cable?Yes, the cable is suitable for charging and for data transfer between devices with USB-C.Take a look at our other electronics and chargers.

Read more less

Apple 20W charger with braided USB-C to USB-C cableThis set consists of an Apple 20W USB-C charger and the braided Apple USB-C charge cable rated at 60W, 1 metre long. It fast-charges an iPhone 15 or newer with USB-C, as well as iPads and AirPods with USB-C. The woven cable is sturdier than a smooth plastic cable and tangles less easily.Because the cable handles up to 60W, you can also use it with a more powerful adapter, for example for a MacBook Air or iPad Pro. With the included 20W adapter, a laptop will charge more slowly. Have an iPhone 14 or older with Lightning? Then you need a USB-C to Lightning cable.Benefits 20W fast charging for iPhone with USB-C Braided Apple cable: sturdy and kink-resistant Cable rated up to 60W, also for iPad and laptop USB-C on both ends of the cable Complete set, ready to use Specifications Brand Apple Adapter Apple 20W USB-C power adapter Cable Apple 60W USB-C charge cable, braided Cable length 1 metre Maximum cable power 60W Connectors USB-C to USB-C EAN (cable) 194253494850 Compatible with iPhone 15 and iPhone 16 series and newer (USB-C) iPad models with USB-C AirPods with USB-C charging case Other USB-C devices, such as Android smartphones What's in the box 1x Apple 20W USB-C charger 1x Apple braided USB-C to USB-C cable (60W, 1 m) Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this cable fit my iPhone 14?No, the iPhone 14 and older have a Lightning port. In that case, choose a 20W charger with a USB-C to Lightning cable.Can I charge my MacBook with it?The cable handles up to 60W. The 20W adapter will charge a MacBook, but slowly. To charge a laptop quickly, you need a more powerful USB-C adapter.What is the advantage of a braided cable?A braided jacket is more resistant to kinking, pulling and wear at the connector, and tangles less easily.How fast does an iPhone 15 charge with 20W?With a 20W USB-C adapter, the iPhone 15 supports fast charging. The exact charging time depends on the model and battery level.Take a look at our other chargers and electronics.

Read more less

20W iPhone fast charger with USB-C to Lightning cableThis 20W iPhone fast charger has a USB-C port and comes with a 1-metre USB-C to Lightning cable. Fast charging works on all iPhones from the iPhone 8 onwards: up to around 50% in about 30 minutes. Various iPad models with fast-charging support also charge faster with it.On this page you choose exactly what you need: the complete set, the adapter only, the cable only, or a combination with a magnetic wireless charger or a 4-in-1 charger. The adapter and cable are shipped in protective plastic without a box: less packaging waste and lower shipping weight.Benefits Fast charging: around 50% in 30 minutes from iPhone 8 USB-C adapter, also works with other USB-C cables 1-metre USB-C to Lightning cable Available separately or as a set Can be combined with a wireless charger Less packaging waste Specifications Brand ZenXstore Type USB-C fast charger with cable Power 20W Adapter port USB-C Cable USB-C to Lightning, 1 m Packaging Protective plastic, no box EAN adapter + cable 8720387803668 EAN adapter only 8720387803675 EAN cable only 8720387803682 EAN MagSafe single + adapter 8720387803699 EAN MagSafe Double + fast charger 7434947939919 EAN Q20 4-in-1 charger 8720387803538 EAN MagSafe single 6094029622637 Compatible withiPhone 8, 8 Plus, X, XR, XS, XS Max, SE (2nd and 3rd generation), iPhone 11, 12, 13 and 14 series, and iPad models with Lightning. iPhone 15 and newer have USB-C: in that case choose the adapter only with a USB-C cable.What's in the box Set: 1x 20W USB-C fast charger and 1x USB-C to Lightning cable (1 m) Other variants: the selected adapter, cable or wireless charger Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this fast charger work with my iPhone?Fast charging works on all iPhones from the iPhone 8 onwards. The included cable is Lightning, so it is for iPhone 8 to 14.Can I order just the adapter or just the cable?Yes, select the variant 'Losse Adapter 20 Watt' (adapter only) or 'Losse Kabel 1 meter' (cable only) at the top of the page.Why is there no box?We ship the adapter and cable in protective plastic. This makes the packaging lighter and creates less waste.Does the fast charger work with the iPhone 15?The adapter does, with a USB-C to USB-C cable. The Lightning cable does not fit the iPhone 15 and newer.Take a look at our other chargers and electronics.

Read more less

Apple Watch charger: magnetic fast charger with USB-CThis Apple Watch charger is the genuine Apple magnetic fast charger to USB-C cable (1 metre, MT0H3). The charger attaches magnetically to the back of your watch. Fast charging works on Apple Watch Series 7 and newer and on Apple Watch Ultra models; older Apple Watches charge at normal speed.Lost it, broken it, or want a spare charger for the office or your travel bag? Plug the USB-C connector into a USB-C adapter, your laptop or a power bank. It is a closed system with no exposed contacts, so placing the watch slightly off-centre is no problem.Benefits Fast charging on Apple Watch Series 7 and newer and Ultra Also charges older Apple Watch models at normal speed Magnetic attachment, snaps into place automatically USB-C connector, 1-metre cable Genuine Apple, handy as a spare charger or for travel Specifications Brand Apple Model Magnetic Fast Charger to USB-C Cable (MT0H3ZM/A) Connection USB-C Cable length 1 metre Colour White Fast charging Apple Watch Series 7 and newer, Ultra and Ultra 2 Adapter Not included EAN 0194253939276 Compatible with Fast charging: Apple Watch Series 7, 8, 9 and newer, Ultra and Ultra 2 Normal charging: older Apple Watch models and Apple Watch SE Can also be used with a Mac, power bank or USB-C adapter What's in the box1x Apple Watch magnetic fast charger to USB-C cable (1 m)Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes the Apple Watch charger come with a plug?No. Use a USB-C adapter; for fast charging we recommend a 20W USB-C adapter. We also sell the charger as a set with an Apple 20W adapter.Does this charger work with my Apple Watch Series 6 or SE?Yes, they charge with it too, just not with fast charging.Which Apple Watch supports fast charging?Fast charging works on Apple Watch Series 7 and newer and on Apple Watch Ultra and Ultra 2.Take a look at our other chargers and electronics.

Read more less

ZenX SJT-300E fast charger 54.6V 5A for 48V batteriesThe ZenX SJT-300E fast charger charges 48V lithium-ion batteries of e-bikes, fat bikes and e-scooters at 54.6V and 5A. Because a standard charger usually delivers 2A, this fast charger gets your battery full again in considerably less time. Ideal if you ride long distances every day, want to top up your fat bike quickly between two rides, or want a second charger for work. The charger is suitable for the OUXI V8 and V20, among others.The SJT-300E is available with a round XLR 3-pin plug (GX16, 1+3 pins) or with a 5.5 x 2.1 mm DC plug; you choose when ordering. Safety: only use this charger for 48V batteries with a charging voltage of 54.6V. Never charge a 36V or 52V battery with this charger, check that your battery can take a 5A charging current, and preferably charge in a dry, cool place and not unattended.Benefits 5A charging current: full faster than with a standard 2A charger 54.6V output, the correct charging voltage for 48V batteries Protected against overcharging and overheating Available with GX16 / XLR 3-pin or DC 5.5 x 2.1 mm plug Compact enough to carry in your bike bag Ideal as a second charger for work or holidays Specifications Brand ZenX (ZenXstore) Model SJT-300E Type Fast charger for 48V lithium-ion battery Output voltage 54.6V DC Charging current 5A Connector XLR 3-pin / GX16 (1+3 pins) or DC 5.5 x 2.1 mm Protection Overcharge and overheating protection Compatible with OUXI V8 and OUXI V20 fat bikes (48V) Other 48V e-bikes and fat bikes with a 54.6V charger 48V e-scooters with a matching charging port What's in the box1x ZenX SJT-300E fast charger 54.6V 5AShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsHow much faster does a 5A charger charge than a 2A charger?The charging time depends mainly on the capacity of your battery. Roughly, you divide the capacity in Ah by the charging current: an empty 15Ah battery needs a good seven hours at 2A and about three hours at 5A, plus a little extra time at the end of charging. So with 5A you're done roughly twice as fast.Is fast charging bad for my battery?For most 48V e-bike batteries with a capacity of about 10Ah or more, 5A is a normal charging current. For small batteries, or batteries for which the manufacturer specifies a lower maximum charging current, a slower charger is the better choice. If in doubt, check the manual of your bike or battery.Will this charger fit my OUXI V8?Yes, the OUXI V8 and V20 are 48V fat bikes and this charger delivers the correct charging voltage of 54.6V. Do choose the plug that fits your charging port. Not sure which version you need? Send us a photo of your battery's charging port.How do I know if my battery is 48V?Check the label on your battery or your current charger. If the battery says 48V, or your charger shows an output voltage of 54.6V, this fast charger matches in terms of voltage. If it says 36V, 42V, 52V or 58.8V, this charger is not suitable.You'll find more chargers and parts in our E-mobility collection.

Read more less

Original Apple 20W USB-C Power AdapterThe Apple 20W USB-C Power Adapter (MHJE3ZM/A) is the original Apple fast charger with a USB-C port for iPhone and iPad. It charges an iPhone 8 or newer to around 50% in about 30 minutes. No cable is included: you use your own USB-C to Lightning or USB-C to USB-C cable.Ideal as a replacement or as an extra charger for home, the office or on the go. The cable supplied with your iPhone or iPad fits this adapter. For an iPhone 15 or newer, use a USB-C to USB-C cable; for an iPhone 14 or older, a USB-C to Lightning cable. With the right cable you can also charge your Apple Watch or AirPods.Benefits Original Apple product, model MHJE3ZM/A 20W for fast charging iPhone 8 and newer Around 50% in 30 minutes USB-C port: works with USB-C to Lightning and USB-C to USB-C cables Also charges iPad, Apple Watch and AirPods with a suitable cable Compact size for travel Specifications Brand Apple Model USB-C Power Adapter 20W (MHJE3ZM/A) Power 20W Port USB-C Plug EU Colour White Cable Not included EAN 0194252157022 Compatible with iPhone 8 and newer, including the iPhone 11 to 15 series (fast charging) iPad Air, iPad Pro, iPad mini and iPad with USB-C or Lightning Apple Watch and AirPods with the suitable cable What's in the box1x Apple 20W USB-C Power Adapter (no cable)Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes the Apple 20W adapter come with a cable?No, the adapter is supplied without a cable. Use the cable from your iPhone or iPad, or a separate USB-C cable.Which cable do I need for my iPhone?For iPhone 15 and newer a USB-C to USB-C cable; for iPhone 8 to 14 a USB-C to Lightning cable.How fast does my iPhone charge with the Apple 20W adapter?An iPhone 8 or newer charges to around 50% in about 30 minutes, depending on the model and battery condition.Can I also charge my iPad with it?Yes, with the suitable cable you can charge iPads, and many iPad models charge faster than with a lower-powered adapter.Also take a look at our other chargers and electronics.

Read more less

Bike helmet with LED rear light for bicycle, e-bike, e-scooter and skateboardThis bike helmet with LED rear light is a lightweight, adjustable all-round helmet with an integrated rear light, so you are more visible at dusk and in the dark. Wear it on your bicycle, e-bike, electric scooter and skateboard. The helmet is made from shock-absorbing material, is available in black and white and comes with a 2-year warranty.Being seen is just as important as being protected. Especially in autumn and winter, when you ride home in the dark more often, a rear light at eye level makes you more visible to traffic behind you. The adjustable straps let you fit the helmet securely and comfortably on your head.Benefits Integrated LED rear light for better visibility For bicycle, e-bike, electric scooter and skateboard Lightweight and adjustable for a good fit Shock-absorbing material Available in black and white 2-year warranty Specifications Brand ZenXstore Type All-round helmet (bicycle, e-bike, scooter, skate) Lighting Integrated LED rear light Fit Adjustable straps Colours Black, white Warranty 2 years EAN Black: 8720387803705 · White: 8720387803712 How to use the helmet Place the helmet straight on your head, just above your eyebrows Adjust the straps so the helmet does not slide back and forth when you shake your head Switch on the LED rear light at dusk, in the dark and in poor visibility Replace a helmet after a hard fall, even if you cannot see any damage What's in the box1x bike helmet with LED rear lightShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs this helmet suitable for an electric scooter?Yes, the helmet is made for bicycle, e-bike, electric scooter and skateboard.Will the helmet fit my head size?The helmet is adjustable with straps. If you are unsure about the fit, contact us at support@zenxstore.nl.When should I use the rear light?Switch on the LED light at dusk, in the dark and in poor visibility so you stand out better from behind.Which colours are available?The helmet is available in black and in white, both with the same LED rear light.You will find more gear in our sport and outdoor collection.

Read more less

Bike storage system for wall or ceiling: one bike or scooter neatly storedThis bike storage system is a steel hanging bracket that lets you hang one bike or electric scooter on the wall or from the ceiling. The set includes a wall bracket and a ceiling bracket, so you decide which mounting suits your garage, storage room or shed best. The hook has a rubber coating so your frame or handlebars won't get scratched.A bike or scooter standing on the floor falls over, gets in the way and takes up exactly the floor space you need. With this bike bracket you give one bike or scooter a fixed place: against the wall in a narrow hallway or storage room, or overhead on the garage ceiling. Have two bikes or scooters? Then the set of 2 is better value.Benefits Wall or ceiling mounting: both brackets are included For most bikes and electric scooters Steel bracket with rubber hook that prevents scratches Frees up floor space in garage, storage room, shed or hallway Compact design that takes up little space on the wall Fixing materials included Specifications Brand ZenXstore Type Bike and scooter hanging bracket (wall and ceiling) Material Steel, hook with rubber coating Mounting Wall or ceiling Quantity 1 storage system SKU ZENX-STEPBEUGEL EAN 8720387803224 How to fit the bike bracket Choose wall or ceiling and check there is enough free space for the length of your bike or scooter. Drill into a solid surface, such as a brick wall, concrete ceiling or wooden beam. For a cavity wall or plasterboard, use plugs designed for that purpose, or screw the bracket into a stud. Hang your bike or scooter by the wheel or frame on the rubber hook. What's in the box 1x wall bracket 1x ceiling bracket Fixing materials Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I hang an electric scooter on this bike storage system?Yes, the bracket is designed for most bikes and electric scooters. For a heavy scooter, always mount it in a solid wall or beam.Should I choose the wall bracket or the ceiling bracket?On the wall, your bike or scooter hangs vertically and close to the floor, which is handy in a narrow storage room. On the ceiling, it hangs overhead, which is handy if you want to keep your floor and walls clear.Can I mount the bracket in plasterboard?Only with plugs suitable for cavity walls, or by screwing the bracket into a wooden stud behind the board.What is the difference with the set of 2?This is one storage system for one bike or scooter. The set of 2 gives you two complete systems, each with a wall and ceiling bracket.Find more handy items for your home and garage in our Home & Garden collection.

Read more less

Magnetic wireless car charger for iPhoneThis magnetic wireless car charger is a phone mount and charger in one. Your phone snaps on magnetically, centres itself automatically on the charging coil and charges wirelessly with a peak output of up to 15 W. Compatible with iPhone and other smartphones that support wireless charging, and available in green, white and orange.Handy for navigation and hands-free calling: your phone is held firmly in view with one hand and the battery stays full, without a loose cable to your device. Several strong magnets keep your phone steady in place, even through bends and over speed bumps. Ideal for the daily commute and long drives.Benefits Magnetic mounting with several strong magnets Wireless charging up to 15 W (peak) Automatic centring on the charging coil Attach and remove with one hand Phone mount and charger in one For iPhone and other smartphones with wireless charging Available in green, white and orange Specifications Brand ZenXstore Type Magnetic wireless car charger / phone mount Wireless charging output Up to 15 W (peak) Phone mounting Magnetic Colours Green, white, orange EAN green 8720387803897 EAN white 7434953990911 EAN orange 7434947817842 Compatible with iPhone models with wireless charging (MagSafe models snap on directly) Android smartphones with wireless charging (Qi), with a magnetic ring or magnetic case What's in the box1x magnetic wireless car chargerShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes the car charger work with Android?Yes, with smartphones that support wireless charging. For the magnetic grip on Android you need a magnetic ring or magnetic case.Will my phone stay in place while driving?Yes, several strong magnets keep your phone steady in place. With thick cases the grip may be weaker.Can I charge with a case on?Yes, with a thin or MagSafe-compatible case. Thick, metal or non-magnetic cases can reduce grip and charging.What is the difference between the colours?Only the colour differs: green, white or orange. Function and charging output are the same.Also take a look at our other electronics and chargers.

Read more less

iPad USB-C hub 7-in-1 in Space GreyThis 7-in-1 iPad USB-C hub adds extra connections to your iPad Pro or USB-C laptop, including an HDMI output up to 4K at 30 Hz, a USB-C port for charging (PD), a USB-C data port, an SD/TF card reader and a 3.5 mm audio jack. The housing is made of Space Grey aluminium, measures 98 x 34 x 10 mm and weighs just 35 grams.The design is tailored to the iPad Pro, so the hub sits firmly against your iPad. Handy for flexible working days, on the train or on holiday: import photos from your camera, show your iPad on a screen or charge while you work. Thanks to the USB-C plug you can also use the same hub with a MacBook, Windows Surface or Chromebook.Benefits HDMI output up to 4K at 30 Hz for an external monitor or TV USB-C PD port: charge your iPad while using the hub SD and microSD (TF) card reader for camera and drone footage 3.5 mm audio jack for your headphones Space Grey aluminium housing that matches your Apple devices Small and light: 98 x 34 x 10 mm and 35 grams Specifications Brand ZenXstore Type USB-C hub 7-in-1 for iPad Pro HDMI 1x, up to 4K at 30 Hz USB-C 1x PD charging port, 1x data Card reader SD/SDHC/SDXC and microSD (UHS-I), one card at a time Audio 3.5 mm Dimensions 98 x 34 x 10 mm Weight 35 g Material Aluminium alloy, ABS and PC Colour Space Grey Systems Windows 7/8/10, macOS, Linux Operating temperature 0 to 50 °C EAN 9508675779326 Compatible with iPad Pro with USB-C MacBook with USB-C Windows laptops and Microsoft Surface with USB-C Chromebooks with USB-C What's in the box1x iPad USB-C hub 7-in-1Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I charge my iPad while the hub is connected?Yes, connect your USB-C charger to the hub's PD charging port.Can I read an SD and microSD card at the same time?No, the card reader reads one card at a time. So use either the SD or the microSD slot.What picture do I get via HDMI?The HDMI output supports up to 4K at 30 Hz. Whether your iPad mirrors or extends the screen depends on your iPad model and iPadOS version.Does the hub also work with a laptop?Yes, with USB-C laptops such as a MacBook, Windows Surface or Chromebook. The hub works with Windows, macOS and Linux.Also take a look at our other electronics and chargers.

Read more less

Solid tyre for the Segway Ninebot Max G30This solid tyre for the Ninebot Max G30 replaces the original tubeless tyre in size 60/70-6.5 (10 inch). There is no air inside and it greatly reduces the risk of punctures: no more pumping up or patching. The hard-wearing rubber is durable and maintenance-free.The original G30 tyre is tubeless and has to stay at the right pressure to work properly. A flat tyre often means a day without your scooter. With a solid tyre, that becomes far less of an issue. A solid tyre does ride a little harder than a pneumatic tyre, because it has less give. For many commuters, the convenience easily outweighs that.Benefits Solid: no air, no pumping, no patching Replaces the original 60/70-6.5 tubeless tyre Hard-wearing and maintenance-free Compatible with the Ninebot Max G30 Same size front and rear on the Max G30 No valve or tyre pressure to check Specifications Brand ZenXstore (compatible with Segway Ninebot) Size 60/70-6.5 (10 inch) Type Solid tyre (airless) Compatible with Segway Ninebot Max G30 Position Front and rear EAN 6094030250263 Compatible withSegway Ninebot Max G30Segway also uses the same 60/70-6.5 tyre size on models including the Max G30P and G30LP. Check the size on the sidewall of your current tyre before ordering.What's in the box1x solid tyre 60/70-6.5Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs fitting a solid tyre difficult?A solid tyre is stiff and takes some force to fit. A bike shop or scooter workshop can do it quickly for you.Does this tyre fit front and rear?Yes, the Max G30 uses size 60/70-6.5 front and rear. Mind the motor cable on the rear wheel, as that is where the motor sits.Does this tyre also fit the G30LP or G30D?Those models also use size 60/70-6.5. Check the size on the sidewall of your current tyre, or send us a photo.Do I still need to check the tyre pressure?No, a solid tyre contains no air. You never need to pump it up.Also take a look at the other parts and accessories for your e-scooter in our E-mobility collection.

Read more less

Zenix shampoo with caffeine, biotin and plant extractsThe Zenix Anti-Hair Loss Shampoo is a 250 ml care shampoo with caffeine, vitamins (biotin, niacin and panthenol) and plant extracts such as rosemary, nettle, green tea and aloe vera. The shampoo cleanses and cares for scalp and hair, for hair that looks fuller, stronger and shinier. Suitable for daily use by men and women.Do you have fine, thin or weak-feeling hair? This caffeine shampoo has been developed to care for scalp and hair every day. The formula also contains Piroctone Olamine, Climbazole and salicylic acid for a fresh, clean scalp. That way you combine cleansing and care in one step.Benefits Cares for scalp and hair from the root With caffeine and the vitamins biotin, niacin and panthenol Plant extracts such as rosemary, nettle and green tea For hair that looks fuller and shinier Fresh, clean scalp Suitable for daily use by men and women Specifications Brand Zenix Product Anti-Hair Loss Hair Shampoo Type Care shampoo Contents 250 ml Key ingredients Caffeine, biotin, niacin, panthenol, plant extracts (incl. rosemary, nettle, green tea, aloe vera), Piroctone Olamine, Climbazole, salicylic acid Target group Men and women EAN 8680075544092 How to use the Zenix shampoo Wet your hair thoroughly. Gently massage a small amount of shampoo into the scalp. Leave on for a few minutes. Rinse thoroughly with lukewarm water. Avoid contact with the eyes. In case of contact, rinse immediately with water.What's in the box1x Zenix Anti-Hair Loss Shampoo 250 mlShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhat ingredients are in the Zenix shampoo?The shampoo contains caffeine, biotin, niacin, panthenol and plant extracts such as rosemary, nettle, green tea and aloe vera, among others.Is the shampoo suitable for daily use?Yes, the shampoo is suitable for daily use by both men and women.Is this a medical product?No, it is a cosmetic shampoo that cares for scalp and hair. If you experience sudden or heavy hair loss, consult your GP.Which hair type is the shampoo intended for?The shampoo is intended for anyone who wants to give fine, thin or weak-feeling hair some extra care.Also take a look at the other products in our beauty and personal care collection.

Read more less

ZenXtravel memory foam neck pillow with sleep maskThe ZenXtravel neck pillow is an ergonomic travel pillow made from memory foam that moulds to your neck and head. The pillow measures 35 x 30 x 10 cm, has a washable cover and comes with a free sleep mask. Ideal for long journeys by plane, car or train. Choose from red, blue or cream.Anyone who has tried to sleep in an aeroplane seat with their head nodding forward knows how welcome good support is. This travel pillow keeps your head upright, so you can relax more easily on a night flight, a train journey or a long car ride as a passenger. The sleep mask keeps the light out. The pillow is compact enough for your hand luggage or backpack.Benefits Memory foam that moulds to your neck and head Ergonomic shape for support while travelling Washable cover, easy to keep fresh Free sleep mask included Compact for hand luggage or backpack Three colours: red, blue and cream Specifications Brand ZenXtravel (ZenXstore) Type Neck pillow / travel pillow Dimensions 35 x 30 x 10 cm Filling Memory foam Cover Washable Colours Red, blue, cream EAN red 8721001350094 EAN blue 8721001350100 EAN cream 8721001350117 How to use the neck pillow Place the pillow around your neck with the opening at the front Let the memory foam warm up to body temperature for a moment so it moulds better Recline the backrest slightly for the most support Wash the cover regularly, especially after a long trip What's in the box 1x ZenXtravel neck pillow 1x sleep mask Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I take a neck pillow in my hand luggage?Yes, a travel pillow is allowed in hand luggage. Many travellers wear it around their neck or attach it to their bag.Can I wash the cover of the travel pillow?Yes, the cover is washable, so the pillow is easy to keep fresh.How big is the ZenXtravel neck pillow?The pillow measures 35 x 30 x 10 cm.Is the sleep mask included?Yes, every neck pillow comes with a free sleep mask.

Read more less

The Milkmaid decorative cushion: Vermeer on your sofaThe Milkmaid decorative cushion by ZenXhome is a 43 x 43 cm art cushion featuring the famous painting by Johannes Vermeer. It comes with the cushion filling included, so you can place it straight on your sofa, armchair or bed. A calm, recognisable art accent for lovers of the Dutch Masters.The Milkmaid is known for its soft daylight and its yellow, ultramarine blue and red tones. That makes the cushion a great match for a light-coloured sofa, a country-style or classic interior, or a kitchen or dining area. At 43 x 43 cm it is slightly larger than a standard 40 x 40 cm cushion, giving a full, luxurious look. Combine it with other art cushions from the ZenXhome Dutch Masters collection, such as Girl with a Pearl Earring.Benefits Image of The Milkmaid by Johannes Vermeer from the Rijksmuseum Size 43 x 43 cm, slightly larger than a standard decorative cushion Cushion filling included, ready to use Soft yellow and blue tones for a calm interior An original gift for art and Vermeer lovers Part of the ZenXhome Dutch Masters collection Specifications Brand ZenXhome (ZenXstore) Type Decorative cushion / art cushion Image The Milkmaid, Johannes Vermeer (c. 1660) Dimensions 43 x 43 cm Filling Cushion filling included EAN 8720387803354 About the paintingJohannes Vermeer (1632-1675) painted The Milkmaid around 1660 in Delft, in oil on canvas. The painting shows a maidservant carefully pouring milk into a bowl, in bright light falling through the window. The original is small, about 45.5 x 41 cm, and therefore almost the same size as this cushion. The Rijksmuseum in Amsterdam acquired the work in 1908, and it can still be seen there today.What's in the box 1x decorative cushion The Milkmaid (43 x 43 cm) 1x cushion filling Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes The Milkmaid decorative cushion come with filling?Yes, The Milkmaid decorative cushion comes with the cushion filling included. There is no need to buy a separate inner cushion: take it out of the packaging, give it a shake and place it on your sofa, armchair or bed. Any questions about the cushion? Feel free to email us at support@zenxstore.nl.How big is The Milkmaid cushion?The cushion measures 43 x 43 cm. That is slightly larger than the common 40 x 40 cm size, so it looks fuller on a sofa or bed. A nice detail: Vermeer's original painting is about 45.5 x 41 cm, so the cushion is almost the size of the real work.Where is Vermeer's real Milkmaid on display?The original painting by Johannes Vermeer, painted around 1660, hangs in the Rijksmuseum in Amsterdam. The museum acquired it in 1908. It is one of the best-known works of the Dutch Golden Age and, together with Girl with a Pearl Earring, one of Vermeer's most famous paintings.Is this decorative cushion a good gift?Definitely. The Milkmaid is a beloved and recognisable painting, which makes the cushion a lovely gift for art lovers, for a housewarming or for anyone who enjoys the Dutch Masters. It is an affordable art gift that actually gets used, and we ship it free of charge within the Netherlands.How quickly will the cushion be delivered?The cushion is in stock in our own warehouse in Rosmalen. Orders are processed within 1-2 working days and are usually delivered within 2-3 working days in the Netherlands and Belgium. Shipping within the Netherlands is free and you have a 14-day cooling-off period. Still have a question? Feel free to email us at support@zenxstore.nl.Also take a look at the other art cushions and home accessories in our Home & Garden collection.

Read more less

42V 2A charger for Segway Ninebot electric scootersLost or broken your charger? This 42V 2A charger is a compatible replacement charger for Segway Ninebot electric scooters with a 36V battery, such as the Ninebot ES1, ES2, ES4, E22E and E45E. It can also be used with various Xiaomi scooters that have the same charging voltage and charging port. The adapter has an EU plug, so you can plug it straight into a socket in the Netherlands or Belgium.Please note: this is not an original Segway product, but a charger with the same 42V charging voltage. Before ordering, check the label on your old charger: if it states an output voltage of 42V, this charger is suitable in terms of voltage. Safety: only use this charger for scooters with a 36V battery that is charged at 42V. Models with a higher battery voltage, such as the Segway GT series, need a different charger. Do not charge unattended or near flammable materials.Benefits 42V / 2A output for 36V scooter batteries Compatible with Segway Ninebot ES1, ES2, ES4, E22E and E45E Also usable with various Xiaomi scooters with a 42V charger EU plug, ready to use Ideal as a replacement or spare charger Advice from our customer service if in doubt Specifications Brand ZenXstore (compatible, not an original Segway product) Type Electric scooter charger Output 42V DC, 2A Mains plug EU Compatible with Segway Ninebot ES1, ES2, ES4, E22E, E45E; various Xiaomi models EAN 6094031318399 Compatible with Segway Ninebot ES1 Segway Ninebot ES2 Segway Ninebot ES4 Segway Ninebot E22E Segway Ninebot E45E Various Xiaomi scooters with a 42V charger What's in the box1x 42V 2A charger with EU plugShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWill this charger fit my Segway Ninebot scooter?It is compatible with the Segway Ninebot ES1, ES2, ES4, E22E and E45E. These models have a 36V battery that is charged at 42V. If you have a different Ninebot model, compare the output voltage on your old charger or send us a photo of your charging port and rating plate.Why 42V for a 36V battery?A 36V lithium-ion battery is fully charged at around 42V. A charger therefore always supplies slightly more voltage than the battery's nominal voltage. A 42V charger is the right choice for a 36V scooter such as the Ninebot ES series.Is this an original Segway Ninebot charger?No, it is a compatible replacement charger with the same 42V charging voltage. It is not made by Segway itself. This way you can charge your scooter again without a long search for an original charger.Does this charger fit a Ninebot Max G30?No. The Ninebot Max G30 has a built-in charger and is charged with a mains cable, not with an external adapter like this one. This charger is intended for scooters with an external 42V charger, such as the ES series and the E22E and E45E.You will find more chargers and parts in our E-mobility collection.

Read more less

20W USB-C charger with Lightning cable, as a set or separatelyThis 20W USB-C charger with a 1-metre USB-C to Lightning cable is designed for fast charging iPhones with a Lightning port. At 20W, an iPhone from the iPhone 8 onwards charges to around 50% in about 30 minutes. The choice is yours: the complete set, just the charger or just the cable.Already have a good cable? Then simply order the 20W charger. Cable broken? Then the separate USB-C to Lightning cable is all you need. The cable also charges an iPad or AirPods with Lightning, and lets you transfer data via the USB-C port of a MacBook. The compact charger fits any wall socket.Benefits Choose a set, charger only or cable only 20W for fast charging from iPhone 8 1-metre cable, USB-C to Lightning Cable also transfers data with a USB-C laptop Compact charger with USB-C port For iPhone, iPad and AirPods with Lightning Specifications Brand ZenXstore Type USB-C charger and/or cable Power 20W Charger port USB-C Cable USB-C to Lightning, 1 m EAN set (charger + cable) 7434946170139 EAN 20W charger only 8720387803330 EAN cable only 8720387803064 Which variant should I choose? Charger + cable: if you need everything new. 20W charger only: if you already have a USB-C cable; also handy for the iPhone 15 and newer with a USB-C to USB-C cable. Cable only: if you already have a USB-C adapter and an iPhone or iPad with Lightning. Compatible withiPhone 8 up to the iPhone 14 series, iPhone SE (2nd and 3rd generation), iPad models and AirPods with Lightning. The cable does not fit the iPhone 15 and newer.What's in the box Set: 1x 20W USB-C charger and 1x USB-C to Lightning cable (1 m) Charger only: 1x 20W USB-C charger Cable only: 1x USB-C to Lightning cable (1 m) Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I order just the charger or just the cable?Yes, select the charger-only or cable-only variant at the top of the page.Does this Lightning cable work with the iPhone 15?No, the iPhone 15 and newer have a USB-C port. The separate 20W charger does work, with a USB-C to USB-C cable.How fast does my iPhone charge with this charger?From the iPhone 8 onwards, about 50% in 30 minutes, depending on model and battery condition.Can I charge my iPad with it?Yes, iPads with Lightning charge with the cable and the 20W charger.Also take a look at our other chargers and electronics.

Read more less

Kickstand for the Xiaomi M365, 1S, Essential, Pro 2 and Mi 3This kickstand for the Xiaomi M365 is a black replacement side stand that lets you park your electric scooter upright. It fits the Xiaomi M365, M365 Pro, Mi 1S, Mi Essential, Pro 2 and Mi Electric Scooter 3. You fit it with the 2 screws included.Is your scooter's stand bent, broken or no longer folding out properly? Then your scooter topples over or you constantly have to lean it against a wall. With this replacement stand you can park it stably again, at home, at work or on the go. The stand is light, so you won't notice it while riding.BenefitsPark your scooter upright and stable againReplaces a bent or broken standFits six Xiaomi modelsIncludes 2 screws for fittingLightweight, no disturbance while ridingBlack, matches the original lookSpecificationsBrandZenXstore (compatible with Xiaomi)TypeSide stand / kickstandColourBlackCompatible withXiaomi M365, M365 Pro, Mi 1S, Mi Essential, Pro 2, Mi Electric Scooter 3Fitting2 screws (included)EAN8719689517540Compatible withXiaomi M365Xiaomi M365 ProXiaomi Mi 1SXiaomi Mi EssentialXiaomi Pro 2Xiaomi Mi Electric Scooter 3How to replace the standLay the scooter on its side on a soft surface.Unscrew the 2 screws of the old stand.Fit the new stand using the screws included.Check that it folds in and out smoothly.What's in the box1x kickstand for electric scooter (black)2x screwShipping and serviceFree shipping within the NetherlandsShipped from our own warehouse in Rosmalen (NL), no dropshippingOrders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days14-day cooling-off periodPersonal customer service via support@zenxstore.nlFrequently asked questionsDoes this stand fit the Xiaomi Mi 3?Yes, the stand fits the Mi Electric Scooter 3, as well as the M365, M365 Pro, 1S, Essential and Pro 2.What tools do I need?A suitable Allen key to loosen and tighten the 2 screws.Are the screws included?Yes, 2 screws are included.Is this an original Xiaomi stand?No, it is a replacement stand that is compatible with these Xiaomi models.Also check out the other parts and accessories for your electric scooter in our E-mobility collection.

Read more less

11-in-1 USB-C hub with wireless chargerThis 11-in-1 USB-C hub is a multiport adapter and wireless charger in one: you get HDMI (up to 4K at 30 Hz), VGA (1080p at 60 Hz), Gigabit Ethernet, three USB 3.0 ports, an SD and microSD card reader, a headphone jack and a USB-C charging port, plus a charging pad for your smartphone. Compatible with MacBook and MacBook Pro with USB-C or Thunderbolt 3 and other laptops and tablets with USB-C.Ideal for home workers and presentations: connect a monitor or projector via HDMI or VGA (both at once, showing the same image), work over a stable network cable and place your phone on top of the hub to charge it wirelessly. With this USB-C docking station you replace a whole drawer full of separate adapters.Benefits 11 functions in one hub, including wireless charging for Qi smartphones HDMI up to 4K at 30 Hz and VGA up to 1080p at 60 Hz Gigabit Ethernet (1000 Mbps) for stable internet 3x USB 3.0 with transfer speeds up to 5 Gbps SD and microSD card reader and 3.5 mm audio jack USB-C port to charge your laptop through the hub Quiet low-speed fan keeps the hub cool during wireless charging Specifications Brand ZenXstore Type USB-C hub / docking station with wireless charger Connection USB-C / Thunderbolt 3 HDMI 1x, up to 4K at 30 Hz VGA 1x, up to 1080p at 60 Hz USB 3x USB 3.0 (up to 5 Gbps) Network Gigabit Ethernet (RJ45) Card reader SD and microSD Audio 3.5 mm headphone jack Charging port USB-C Wireless charging Yes, for smartphones with wireless charging SKU ZENX-11IN1HUB-ROND EAN 9504285214264 Compatible with MacBook and MacBook Pro with USB-C or Thunderbolt 3 Windows laptops, notebooks and tablets with USB-C Wireless charging: iPhone and other smartphones that support wireless charging What's in the box1x 11-in-1 USB-C hub with wireless chargerShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I use HDMI and VGA at the same time?Yes, both outputs work simultaneously and show the same image. Two different images (extended desktop) are not possible.Which phones can I charge wirelessly on the hub?iPhones and other smartphones that support wireless charging (Qi). A thin case is usually no problem; thick or metal cases can prevent charging.Does the hub make any noise?During wireless charging a small fan runs at low speed to keep the hub cool. It is tuned to run quietly to keep noise to a minimum.Can I display 4K at 60 Hz?No, the HDMI port supports 4K at 30 Hz. Lower resolutions, such as 1080p, do run at 60 Hz.Does the hub work with my Windows laptop?Yes, if your laptop has a USB-C or Thunderbolt 3 port that supports the hub's functions, such as video over USB-C.Also take a look at our other electronics and chargers.

Read more less

Titanium blade set for the Robomow RK robotic mowerThe Robomow RK titanium blade set contains compatible replacement blades for robotic mowers in the Robomow RK series, such as the RK1000 and RK2000. The blades are made of hard-wearing titanium, so they stay sharp for a long time. That way you always have a spare ready when your current blade is worn or damaged.Robomow recommends replacing the mowing blade once or twice a year. A blunt blade tears the grass, which you can see from ragged, brown tips. With these replacement blades for your Robomow RK you change the blade in a few minutes and your robotic mower cuts neatly and evenly again.Benefits Titanium blades, hard-wearing and long-lasting sharpness Compatible with the Robomow RK series Clean cut for a healthy lawn Easy to replace yourself in a few minutes Always a spare to hand Specifications Brand ZenXstore (compatible part, not original) Type Replacement blades for robotic mower Material Titanium Compatible with Robomow RK series (incl. RK1000, RK2000) EAN 8721001350469 Compatible with Robomow RK1000 and RK1000 Pro Robomow RK2000 and RK2000 Pro Other models in the Robomow RK series Replacing safelyAlways switch off the robotic mower and activate the lock (for example via the stop button, PIN code or main switch, depending on your model) before tilting the mower or replacing blades. Wear work gloves, as new blades are very sharp, and follow your mower's manual.What's in the box1x titanium blade set for Robomow RKShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this blade set fit all Robomow RK models?According to our product data, the set is suitable for all models in the Robomow RK series, such as the RK1000 and RK2000. If in doubt, send us your model number.How often should I replace the blades on my Robomow RK?Robomow recommends replacing the blade once or twice a year. With a lot of sand or twigs in the grass, it may be needed more often.Are these original Robomow RK blades?No, this is a compatible titanium blade set supplied by ZenXstore. Robomow is only mentioned to indicate compatibility.Can I replace the blades myself?Yes, it only takes a few minutes. Switch the mower off first, make sure it cannot start, and follow the steps in your manual.Also take a look at the other garden and lawn products in our Home & Garden collection.

Read more less

Suspension front fork with hydraulic shock absorber for your e-scooterThis suspension front fork for the Xiaomi M365 has a hydraulic shock absorber and replaces your scooter's original rigid fork. It absorbs the impact of bumps, paving slabs and potholes for a more comfortable ride. Compatible with the Xiaomi M365, M365 Pro, Mi 1S, Mi 3 and the AovoPro.The M365 and most similar scooters come without front suspension as standard. On cobblestones, cycle paths with tree roots or poor roads, you feel every bump in your wrists and arms. With a suspension front fork, the front end cushions those knocks. That makes for a nicer ride and reduces vibrations in the handlebar and stem.Benefits Hydraulic shock absorber in the front fork Absorbs bumps and vibrations More comfort on cobblestones and poor roads Less vibration in your handlebar and wrists Replaces the rigid original front fork Fits several models: M365, Pro, 1S, Mi 3, AovoPro Specifications Brand ZenXstore Type Suspension front fork with hydraulic shock absorber Position Front Compatible with Xiaomi M365, M365 Pro, Mi 1S, Mi 3, AovoPro EAN 6094047514556 Compatible with Xiaomi M365 Xiaomi M365 Pro Xiaomi Mi 1S Xiaomi Mi 3 AovoPro (M365 version) Not sure whether the fork fits your scooter? Send us a photo of your current front fork and front wheel and we'll help you check.Fitting and safetyThe front fork is a part that directly affects your steering and braking. Only fit it yourself if you have experience with scooter repairs, or have it done by a scooter workshop. Always disconnect the battery before starting, and check after fitting that all bolts are properly tightened.What's in the box1x suspension front fork with hydraulic shock absorberShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this suspension front fork fit the Xiaomi M365 Pro?Yes, the fork is designed for the Xiaomi M365, M365 Pro, Mi 1S, Mi 3 and the AovoPro.What difference does a suspension front fork make?Bumps and vibrations from the road come through the handlebar far less harshly. Especially on cobblestones and poor cycle paths, the ride is much more pleasant.Can I fit the front fork myself?Yes, with experience and the right tools. Because the fork is important for your safety, we recommend a workshop if you're unsure.Do I need to transfer my front wheel?Yes, you reuse your existing front wheel (motor wheel) in the new fork.Also take a look at the other parts and accessories for your e-scooter in our E-mobility collection.

Read more less

Girl with a Pearl Earring cushion: Vermeer on your sofaThe Girl with a Pearl Earring cushion by ZenXhome is a decorative 40 x 40 cm art cushion featuring the famous painting by Johannes Vermeer. The cushion comes with an insert included, so you can put it straight onto your sofa, armchair or bed. A Dutch Design accent for lovers of the Dutch Masters and an original gift.The original painting hangs in the Mauritshuis in The Hague and was painted around 1665 in oil on canvas. It is not a portrait of a real person but a so-called tronie: a study of an imaginary figure with a blue and yellow turban and a strikingly large pearl, which Vermeer captured with just a few brushstrokes. Nice detail: the canvas measures 44.5 x 39 cm, so this Girl with a Pearl Earring cushion is roughly the size of the original.Benefits Features Vermeer's Girl with a Pearl Earring, one of the best-known Dutch paintings 40 x 40 cm, fits almost any sofa or chair Cushion insert included, ready to use An art accent that works in both classic and modern interiors Original gift for art and Vermeer lovers From the ZenXhome Dutch Masters collection Specifications Brand ZenXhome (ZenXstore) Type Decorative cushion / art cushion Image Girl with a Pearl Earring, Johannes Vermeer (c. 1665) Dimensions 40 x 40 cm Filling Cushion insert included EAN 8721001350360 About the paintingJohannes Vermeer (1632-1675) worked in Delft and produced only a small number of paintings in his lifetime. Girl with a Pearl Earring remained unknown for a long time, until it was recognised at an auction in 1881. Collector A.A. des Tombe bought it for a small sum and bequeathed it to the Mauritshuis, where it has been on display since 1903. With this art cushion, you bring a piece of the Dutch Golden Age right into your living room.What's in the box 1x Girl with a Pearl Earring cushion (40 x 40 cm) 1x cushion insert Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes the Girl with a Pearl Earring cushion come with filling?Yes, the cushion comes with an insert included, so you can use it straight away.How big is the cushion?The cushion measures 40 x 40 cm, a standard size that fits most sofas and armchairs.Where does the real Girl with a Pearl Earring hang?The original painting by Johannes Vermeer hangs in the Mauritshuis in The Hague.Is this cushion a good gift?Definitely for anyone who loves art, Vermeer or Dutch Design. It is an affordable art gift that actually gets used.Take a look at the other products in our home and garden collection.

Read more less

Samsung 45W power adapter with USB-C cableThe Samsung 45W power adapter (EP-T4510) is the genuine Samsung charger for Super Fast Charging 2.0. It delivers up to 45W via USB Power Delivery 3.0 with PPS and comes with a 5A USB-C to USB-C cable, 1.8 metres long. It charges compatible Galaxy smartphones at their highest speed, as well as tablets and other USB-C devices.The adapter and cable are ready to use straight away: plug in the cable, plug into the socket. Because the cable is detachable, the charger is easy to take along in your bag or suitcase. Also handy as a replacement for a lost or broken genuine Samsung fast charger.Benefits Up to 45W Super Fast Charging 2.0 for compatible Galaxy devices USB Power Delivery 3.0 with PPS, also for other USB-C devices Includes a 5A USB-C cable, 1.8 m Detachable cable: easy to take along or replace Genuine Samsung, black Specifications Brand Samsung Model EP-T4510 45W Power Adapter Maximum power 45W Standard USB Power Delivery 3.0 (PDO/PPS), Super Fast Charging 2.0 Output PDO 9V/15V 3A, 20V 2.25A; PPS 3.3-21V Input 100-240V Cable USB-C to USB-C, 5A, 1.8 m Dimensions 43.5 x 84.8 x 28 mm Weight 115.4 g Colour Black EAN 8806090104510 Compatible withAccording to Samsung, Super Fast Charging 2.0 (45W) works with the Galaxy S20 Ultra, Note10+, Tab S7+ and newer compatible models, such as Galaxy S Ultra devices. Other USB-C smartphones, tablets and lightweight laptops with USB Power Delivery also charge with it.What's in the box 1x Samsung 45W USB-C adapter 1x USB-C to USB-C cable (5A, 1.8 m) 1x Quick start guide Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhich Samsung phones charge at 45W?Super Fast Charging 2.0 works on the Galaxy S20 Ultra, Note10+, Tab S7+ and newer compatible models, among others. Other devices charge at their own maximum speed.Can I charge a laptop with it?Lightweight laptops that charge via USB-C Power Delivery can be charged with it. Laptops that need more than 45W will charge more slowly.Is a cable included?Yes, a 1.8-metre USB-C to USB-C cable rated for 5A. You need it for the full 45W.Take a look at our other chargers and electronics.

Read more less

Zenix SPF 56+ face sunscreenThe Zenix Professional SPF 56+ sunscreen is a face cream with UVA and UVB protection for everyday use. Its light texture absorbs quickly without feeling greasy and helps keep skin hydrated. Suitable for face and neck, in summer and on the slopes.On the piste, at the beach or during outdoor sports, your face takes the most sun. This face sunscreen spreads easily and fits right into your daily routine. With its high protection factor, it is a great choice for anyone who spends a lot of time outdoors, whatever the season.Benefits High protection factor: SPF 56+ Protection against UVA and UVB rays Light, fast-absorbing, non-greasy texture Made specifically for face and neck Ideal for summer, winter sports and outdoor activities For everyday use Specifications Brand Zenix Product Professional SPF 56+ Effective UVA UVB Protector Type Face sunscreen Protection factor SPF 56+ Protection UVA and UVB Application Face and neck EAN 8680075544047 How to use sunscreen Apply generously before going out in the sun. Reapply regularly, especially after swimming, sweating or towelling dry. Don't forget your ears, neck and hairline. Avoid contact with the eyes. Don't stay in strong sunlight for too long, even when wearing sunscreen. Keep babies and young children out of direct sunlight.What's in the box1x Zenix Professional SPF 56+ face sunscreenShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually takes 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs Zenix SPF 56+ suitable for winter sports?Yes, the cream is designed for use in summer and during winter sports, when snow reflects extra sunlight.Does the cream protect against UVA and UVB?Yes, Zenix sunscreen offers protection against both UVA and UVB rays.Does the cream feel greasy?No, the light texture absorbs quickly without a greasy feel, so it is easy to wear under make-up or every day.How often should I reapply?Reapply regularly, especially after swimming, sweating or towelling dry. That way your protection stays effective.Take a look at the other products in our beauty and personal care collection.

Read more less

Zenix Men Series powder wax for volume and a matte lookThe Zenix Men Series Hair Style Powder Wax is a 20-gram styling powder developed especially for men. Its light texture adds instant volume and texture without weighing your hair down, for an effortless, matte look. Choose between the More Volume (Inventive) and Natural Look variants.Powder wax is ideal if you want a tousled, natural style that doesn't feel sticky or look shiny. Apply the powder wax to dry hair and style with your fingers or a comb. Because it rinses out easily with water and leaves no residue, your hair feels clean and fresh again after washing.Benefits Instant volume and texture, even for fine hair Matte finish without a greasy or sticky feel Light texture that doesn't weigh hair down Easy to touch up and restyle Rinses out easily with water, leaving no residue Compact 20 g pot, handy on the go Specifications Brand Zenix Series Men Series Product Hair Style Powder Wax Type Styling powder / powder wax Contents 20 g Finish Matte Variants More Volume (Inventive), Natural Look EAN More Volume 8680075542104 EAN Natural Look 8680075543477 How to use Zenix powder wax Take a small amount of powder between your palms and rub to warm it up. Spread the powder wax evenly through dry hair. Style as you like with your fingers or a comb; you can also accentuate individual strands. To remove, simply wash out with water and shampoo. Avoid contact with the eyes.What's in the box1x Zenix Men Series Hair Style Powder Wax (20 g), in the chosen variantShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhat is the difference between More Volume and Natural Look?More Volume (Inventive) focuses on extra volume and texture. Natural Look gives a natural-looking result with a matte finish.Do you apply powder wax to wet or dry hair?To dry hair. Rub a small amount between your hands and work it through your hair.Does powder wax wash out easily?Yes, the powder wax rinses out easily with water and leaves no residue in the hair.How long does 20 grams of powder wax last?You only need a small amount each time, so a 20 g pot lasts for many styling sessions.Also take a look at the other products in our beauty and personal care collection.

Read more less

Oakley Neck Gaiter neck warmer: four colours, two sizesOn this page you will find the Oakley Neck Gaiter neck warmer (FOS900712) in all the colours and sizes we stock: Painted Gray Camo, Painted Green Camo, Universal Blue and Blackout, each in S/M and L/XL. The neck warmer is made of 100% polyester double-layer interlock fabric with, according to Oakley, moisture-wicking Hydrolix fabric and odour-resistant technology.A bare neck quickly makes a cold day on the slopes or on the motorbike uncomfortable. Wear this light neck gaiter as a neck warmer under your jacket, pull it up over your mouth and nose against wind and dust, or use it as a snood when running and cycling. Because you choose colour and size in one go here, this is the handiest page to compare the variants.Benefits Four colours: two camo prints and two solid colours Two sizes: S/M (snug) and L/XL (roomy) Hydrolix moisture-wicking fabric (according to Oakley) Odour-resistant technology (according to Oakley) Reflective label on the back Neck warmer, snood and face covering in one Machine washable Specifications Brand Oakley Model Neck Gaiter (FOS900712) Colours Painted Gray Camo, Painted Green Camo, Universal Blue, Blackout Sizes S/M, L/XL Material 100% polyester, double-layer interlock fabric Technology (according to Oakley) Hydrolix moisture-wicking fabric, odour-resistant technology Details Reflective label on the back, B1B logo top left Care Machine washable, reusable EAN Painted Gray Camo S/M: 193517146672 · L/XL: 193517146665 EAN Painted Green Camo L/XL: 193517146689 EAN Universal Blue S/M: 193517146658 · L/XL: 193517146641 EAN Blackout L/XL: 193517146702 Fit and sizeChoose S/M if you have a slimmer neck and want the gaiter to stay snug, even over your nose. Choose L/XL for a wider neck or if you wear it loosely over a jacket collar. Oakley does not provide a size chart in centimetres; email us if in doubt.Which colour should I choose? Painted Gray Camo: grey camo, calm and versatile Painted Green Camo: green camo for outdoors and hunting Universal Blue: solid blue, pairs with the Oakley Mask Loose Blackout: all black, discreet under a helmet and jacket What's in the box1x Oakley Neck Gaiter in the colour and size you chooseShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhich colours does the Oakley Neck Gaiter come in?We stock Painted Gray Camo, Painted Green Camo, Universal Blue and Blackout, each in S/M and L/XL.Is the Oakley Neck Gaiter a fleece neck warmer?No, this gaiter is made of light polyester interlock fabric, not fleece. That makes it thin enough to wear under a helmet and during sport.What is the difference between S/M and L/XL?S/M is narrower and fits snugly, L/XL is roomier and fits more loosely. Fabric and colours are the same.Can I wear the neck gaiter over my mouth and nose?Yes, Oakley also designed it as a face covering against dust, dirt and pollen.Also take a look at our other sport and outdoor clothing.

Read more less

USB rechargeable bike light set: LED front light and rear lightThis USB rechargeable bike light set consists of an LED front light and a rear light that you fit to your bike without tools using a silicone quick-release strap. The front light delivers up to 250 lumens, both lights have 4 light modes and you charge them via USB, so no batteries are needed. The lights are splash-resistant to IPX3.Handy for commuting, cycling in autumn and winter, or if your bike has no (working) dynamo lighting. Because the lights unclip quickly, you can take them with you when you park and charge them at home or at the office. A charge indicator (red/green) shows when it is time to recharge.Benefits Set of front light and rear light USB rechargeable, no batteries needed LED front light up to 250 lumens 4 light modes, including steady light Tool-free mounting with silicone strap, for handlebar and seat post Charge indicator (red/green) Splash-resistant (IPX3) for cycling in the rain Specifications Brand ZenXstore Type LED bike light set, front and rear light Front light output Up to 250 lumens Light modes 4 (front and rear light) Charging Via USB Front light charging time Approx. 4 hours Front light run time Approx. 4 to 9 hours, depending on mode Water resistance IPX3 (splash-resistant) Front light dimensions 10.2 x 3.0 x 2.3 cm Front light weight 106 g Colour Black Mounting Silicone quick-release strap EAN 8721001350186 Bike lighting in the Netherlands: what to look out forIn the Netherlands you must use a white or yellow front light and a red rear light in the dark and in poor visibility. Detachable rechargeable lights are allowed, but the light must not flash on public roads. So use a steady mode on the road and save the flashing modes for things like running or camping. Aim the front light at the road so you do not dazzle oncoming traffic. You can find the legal rules on rijksoverheid.nl; other countries may have different regulations.How to use the bike lightsWrap the silicone strap around your handlebar or seat post and hook it into the clip. Switch the light on with the on/off button; switch between modes with a short and a long press on the same button.What's in the box 1x LED front light 1x rear light USB charging cable Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsCan I use these bike lights in the Netherlands?Detachable rechargeable lights are allowed as long as the front light is white or yellow, the rear light is red and the light does not flash on public roads. So use a steady mode on the road.How long does a full battery last?The front light runs for about 4 to 9 hours, depending on the light mode. A full charge takes about 4 hours.Can I ride in the rain with this bike light?Yes, the lights are splash-resistant to IPX3. They cannot be submerged in water.Does the bike light fit every handlebar?The silicone strap is flexible and fits around most handlebars and seat posts, from children's bikes to mountain bikes.Find more accessories for on the go in our E-mobility collection.

Read more less

Titanium replacement blades for the Worx Landroid robot mowerThese titanium replacement blades for Worx Landroid are a set of 30 compatible blades, including screws, in a resealable storage box. The blades have a titanium coating and are sharpened on both sides. They fit a wide range of Landroid models, from the S300 to the L2000i and the WR series.A Worx Landroid mows often, so the blades wear quickly from sand, twigs and small stones. Blunt blades tear the grass, leaving the lawn looking brown and ragged. With this set of Landroid blades you have enough stock for several changes, and the resealable box keeps the sharp blades safely stored.Benefits 30 titanium-coated replacement blades in one set Sharpened on both sides Screws included Resealable box for safe storage Compatible with many Worx Landroid models Stock for several blade changes Specifications Brand ZenXstore (compatible part, not original) Type Replacement blades for robot mower Quantity 30 blades, screws included Material Titanium-coated, sharpened on both sides Packaging Resealable storage box Compatible with Worx Landroid (see model list) EAN 8720387803774 Compatible withWorx Landroid S300, S500i, S450i, S700i, S Basic, M500, M700, M800i, M900, M1000, M1000i, M1200i, L1500, L1500i, L2000, L2000i, ID B, WR130E, WR141E, WR142E, WR143E and WR153E.Replacing safelyAlways switch off the robot mower and activate the lock (for example via the stop button, PIN code or main switch, depending on your model) before tilting the mower or replacing blades. Wear work gloves, as new blades are very sharp, and follow your mower's manual.What's in the box 30x titanium replacement blade Screws Resealable storage box Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsWhich Worx Landroid models do these blades fit?According to the product data, they fit models including the Worx Landroid S300, S500i, S450i, S700i, S Basic, M500, M700, M800i, M900, M1000, M1000i, M1200i, L1500, L1500i, L2000, L2000i, ID B, WR130E, WR141E, WR142E, WR143E and WR153E.Do the Worx Landroid blades come with screws?Yes, the blades are supplied with screws in a resealable storage box. Use a new screw with every change.How many changes do I get from 30 blades?That depends on the number of blades on your Landroid's cutting disc. With 30 pieces you can change them several times in any case.Are these original Worx blades?No, these are compatible replacement blades from ZenXstore. Worx and Landroid are mentioned only to indicate compatibility.Also take a look at our other lawn and garden products in the Home & Garden collection.

Read more less

The Threatened Swan decorative cushion: Jan Asselijn on your sofaThe Threatened Swan decorative cushion by ZenXhome is a 40 x 40 cm art cushion featuring the painting by Jan Asselijn, known in Dutch as De Bedreigde Zwaan. It comes with the cushion filling included, so you can place it straight on your sofa, armchair or bed. A powerful image of a white swan defending its nest.The brilliant white swan against a dark blue sky makes this cushion a real eye-catcher. It looks great on a dark sofa or in an interior with blue, grey and natural tones, and works in both classic and modern living rooms. Combine it with a plain white or dark blue cushion, or with other art cushions from the ZenXhome Dutch Masters collection. A special gift for nature and art lovers.Benefits Image of The Threatened Swan by Jan Asselijn from the Rijksmuseum Size 40 x 40 cm, fits almost any sofa, armchair or bed Cushion filling included, ready to use Striking contrast of a white swan against a dark sky A special gift for art and nature lovers Part of the ZenXhome Dutch Masters collection Specifications Brand ZenXhome (ZenXstore) Type Decorative cushion / art cushion Image The Threatened Swan, Jan Asselijn (c. 1650) Dimensions 40 x 40 cm Filling Cushion filling included EAN 8720387803392 About the paintingJan Asselijn (c. 1610-1652) painted The Threatened Swan around 1650, in oil on canvas. The painting shows a swan fiercely defending its nest against an approaching dog. Inscriptions were added later, after which it was seen as an allegory of Grand Pensionary Johan de Witt protecting the country. In 1800 it became the very first acquisition of the Nationale Konst-Gallery, the forerunner of the Rijksmuseum in Amsterdam, where it hangs today.What's in the box 1x decorative cushion The Threatened Swan (40 x 40 cm) 1x cushion filling Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes The Threatened Swan decorative cushion come with filling?Yes, The Threatened Swan decorative cushion comes with the cushion filling included. There is no need to buy a separate inner cushion: take it out of the packaging, give it a shake and place it on your sofa, armchair or bed. Any questions about the cushion? Feel free to email us at support@zenxstore.nl.How big is this cushion?The cushion measures 40 x 40 cm. That is a common standard size for decorative cushions and fits most sofas, chairs and beds. The white swan stands out best on a dark or blue sofa; on a light sofa, combine it with a plain dark blue cushion.Where is the real Threatened Swan painting on display?Jan Asselijn's original painting, made around 1650, hangs in the Rijksmuseum in Amsterdam. The canvas is large, about 144 x 171 cm. In 1800 it was the first acquisition of the Nationale Konst-Gallery, the forerunner of the Rijksmuseum, which places it at the very start of the Dutch national art collection.What does The Threatened Swan mean?Asselijn painted a swan defending its nest against a dog. Words were added later: the swan became the Grand Pensionary, the dog the enemy of the state, and an egg was labelled Holland. The painting thus came to be seen as a symbol of Johan de Witt protecting the Netherlands.Is this decorative cushion a good gift?Definitely. With its striking white swan and the story behind the painting, this cushion is a special gift for art lovers, nature lovers or a housewarming. It is in stock in our warehouse in Rosmalen and we ship it free of charge within the Netherlands, with a 14-day cooling-off period.Also take a look at the other art cushions and home accessories in our Home & Garden collection.

Read more less

Oakley Cloth Face Covering Hooded: hood and face mask in oneThe Oakley Cloth Face Covering Hooded (FOS900714) is a hooded face covering in Universal Blue, available in sizes S/M and L/XL. It is the only model in this range that covers your head as well as your face and neck: a close-fitting French terry hood (80% cotton, 20% polyester) with a drawstring, combined with an integrated mask of 95% polyester and 5% elastane in double-layer interlock fabric.Whereas a neck gaiter only covers your neck and face, this balaclava-style hoodie mask also keeps the wind off your ears and the back of your head. Handy on cold mornings on the bike or motorbike, on the slopes or when hiking and running in winter. According to Oakley, the mask helps keep out dust and dirt, and odour-resistant technology keeps it fresher.BenefitsFrench terry hood for warmth around your head and earsDrawstring to adjust the hood snugly and securelyIntegrated face mask in stretchy double-layer interlock fabricOdour-resistant technology in the mask (according to Oakley)Reflective label for better visibility in low lightReusable and machine washableTwo sizes: S/M and L/XLSpecificationsBrandOakleyModelCloth Face Covering Hooded (FOS900714-6ZZ)ColourUniversal BlueSizesS/M, L/XLHood material80% cotton, 20% polyester (French terry)Mask material95% polyester, 5% elastane, double-layer interlock fabricFeaturesDrawstring, odour-resistant technology, reflective labelCareMachine washable, reusableEANL/XL: 193517135911 · S/M: 193517135928Which size should I choose?Choose S/M if you have a smaller head and slimmer neck and want the hood to fit snugly. Choose L/XL for a larger head, if you want to wear a beanie underneath or prefer the mask to feel a little roomier. You can then fine-tune the hood with the drawstring. Oakley does not provide a size chart in centimetres; if in doubt, send us an email.Difference from the Oakley Neck Gaiter and Mask LooseThe Neck Gaiter is a light tube for neck and face, and the Mask Loose covers only the mouth and nose. The Hooded is the warmest of the three models because it also covers your head.What's in the box1x Oakley Cloth Face Covering Hooded (Universal Blue, in the selected size)Shipping and serviceFree shipping within the NetherlandsShipped from our own warehouse in Rosmalen (NL), no dropshippingOrders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days14-day cooling-off periodPersonal customer service via support@zenxstore.nlFrequently asked questionsCan I wear the Oakley Face Covering Hooded under a helmet?The hood fits closely around your head, so you can wear it under many ski and motorbike helmets. Do check that your helmet still fits properly and securely.What is the difference between size S/M and L/XL?L/XL is roomier around the head and face, S/M fits closer. You can adjust both sizes further with the drawstring.What material is the hood made of?The hood is made of French terry, 80% cotton and 20% polyester. The mask is 95% polyester and 5% elastane.Can the face covering go in the washing machine?Yes, Oakley states that it is machine washable and reusable.Also take a look at our other sports and outdoor clothing.

Read more less

Solid rubber tyre 8.5 inch for the Xiaomi M365 and M365 ProThis solid rubber tyre for the Xiaomi M365 and M365 Pro is a solid 8.5 inch outer tyre without an inner tube. There is no air inside, which greatly reduces the risk of punctures. The tyre weighs about 500 grams, has an inner diameter of 138 mm and an outer diameter of 205 mm, and a tread that channels away water and snow.A flat tyre is the most common fault on the M365. With a solid tyre you are done with patching, pumping and replacing inner tubes. Holes in the sidewall make the tyre lighter and add a little extra cushioning. Bear in mind that a solid rubber tyre rides slightly harder than a pneumatic tyre.BenefitsSolid rubber with no air: greatly reduces the risk of puncturesNo inner tube or valve needed, no more pumpingTread channels away rain and snowHoles in the sidewall for less weight and a bit more comfortHard-wearing rubber for daily useStandard 8.5 inch size of the Xiaomi M365SpecificationsBrandZenXstore (compatible with Xiaomi)TypeSolid rubber tyre, without inner tubeSize8.5 inchInner diameter138 mmOuter diameter205 mmWeightapprox. 500 grams per tyreCompatible withXiaomi M365, Xiaomi M365 ProEAN8720387803200How to fit a solid rubber tyreRemove the wheel from the scooter and take off the old tyre and inner tube.Place the solid tyre in hot water for a few minutes so the rubber becomes more flexible.Coat the inside with a little petroleum jelly or washing-up liquid.Push the tyre over the rim; a tyre lever from a bike repair kit helps.Fitting a solid tyre takes some force. A bike shop or scooter workshop can also do it for you.What's in the box1x solid rubber tyre 8.5 inchShipping and serviceFree shipping within the NetherlandsShipped from our own warehouse in Rosmalen (NL), no dropshippingOrders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days14-day cooling-off periodPersonal customer service via support@zenxstore.nlFrequently asked questionsDo I need an inner tube or valve with this tyre?No, the tyre is solid. You use no inner tube and no valve.Does a solid rubber tyre ride differently from a pneumatic tyre?Yes, slightly harder, because it has less give. On the other hand, there is no air to lose, which greatly reduces the risk of punctures.Does this tyre fit the Xiaomi M365 Pro?Yes, the tyre is made for the 8.5 inch rims of the Xiaomi M365 and M365 Pro.Why is the tyre so hard to fit?Solid rubber is stiff. Warming the tyre in hot water first and coating the inside makes it a lot easier.Also check out the other parts and accessories for your electric scooter in our E-mobility collection.

Read more less

iPhone charger set: 20W USB-C adapter with Lightning cableThis iPhone charger set consists of a 20W USB-C adapter and a 1-metre Lightning to USB-C cable. Together they fast-charge iPhones from the iPhone 8 onwards to around 50% in about 30 minutes. The set is intended for iPhones and iPads with a Lightning port.Handy as a complete spare charger for home, work or your bag. With the same cable you can charge and sync your iPhone or iPad via the USB-C port of a MacBook. You can also charge an iPod or Lightning accessories with it, though not at extra speed. If you have an iPhone 15 or newer with USB-C, choose a fast charger with a USB-C to USB-C cable instead.Benefits Complete set: 20W USB-C adapter and Lightning cable Fast charging: around 50% in 30 minutes from iPhone 8 onwards 1-metre cable for plenty of freedom of movement Cable also for data transfer with a USB-C MacBook For iPhone, iPad and AirPods with Lightning Ready to use straight away Specifications Brand ZenXstore Type Charging set: USB-C adapter + cable Adapter output 20W Adapter port USB-C Cable Lightning to USB-C, 1 m Compatible with iPhone 8 to 14 series, iPhone SE, iPad and AirPods with Lightning EAN 7434946170139 Compatible with iPhone 8, 8 Plus, X, XR, XS and SE (2nd and 3rd generation) iPhone 11, 12, 13 and 14 series iPad models with a Lightning port AirPods with Lightning charging case Not suitable for the iPhone 15 and newer: these have a USB-C port.What's in the box 1x 20W USB-C adapter 1x Lightning to USB-C cable (1 m) Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this charger set work with the iPhone 15?The adapter does, the cable doesn't: the iPhone 15 and newer have USB-C. Use a USB-C to USB-C cable instead.How fast does my iPhone charge with this set?From the iPhone 8 onwards, around 50% in 30 minutes, depending on the model and battery condition.Can I also transfer data with the cable?Yes, via the USB-C port of a MacBook, for example, you can charge and sync your iPhone or iPad.Does the adapter work with other cables too?Yes, the adapter has a standard USB-C port and works with any matching USB-C cable.Also take a look at our other chargers and electronics.

Read more less

USB car charger for the cigarette lighter socketPlug this USB car charger into your car's cigarette lighter or 12V socket and charge two devices at the same time. It has a Quick Charge 3.0 port and a 3.1A port, with a combined maximum output of 30 W. The compact charger has an aluminium housing.Handy on the commute or on long drives: you charge your phone for navigation while your passenger charges a second device at the same time. Devices that support Quick Charge 3.0 charge faster via the QC port; an iPhone doesn't support QC 3.0 but charges via the 3.1A port. A smart chip recognises the connected device and adjusts the current automatically.Benefits Two USB-A ports: Quick Charge 3.0 + 3.1A Up to 30 W combined, charge two devices at once Smart chip matches the charging current to your device Protection against overload, overheating, overvoltage and short circuit Aluminium housing, compact size Fits a standard cigarette lighter or 12V socket Specifications Brand ZenXstore Type USB car charger (cigarette lighter) Ports 2x USB-A: 1x Quick Charge 3.0, 1x 3.1A Maximum output 30 W (total) Connection 12V cigarette lighter Protection Overcurrent, overheating, overvoltage, short circuit Housing Aluminium Cable Not included EAN 7434956527534 Compatible with Android phones with Quick Charge 3.0, such as many Samsung and Xiaomi models iPhone (via the 3.1A port, with your own cable) Tablets, sat navs, dashcams and other USB devices Cars, campervans and vans with a 12V socket What's in the box1x car charger with dual USB portShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsIs a cable included?No, use your own USB-A cable (USB-C, Micro USB or Lightning) for your phone or tablet.Will my iPhone charge fast with this car charger?An iPhone doesn't support Quick Charge 3.0, but it does charge via the 3.1A port. For the fastest iPhone charging you need a USB-C PD charger.Will the car charger fit my car?Yes, if your car has a standard cigarette lighter or 12V socket.Can I also use it in a lorry with 24V?This has not been specified by the manufacturer. If in doubt, contact us via support@zenxstore.nl.Also take a look at our other electronics and chargers.

Read more less

Mudguard bracket for the Xiaomi M365 and M365 ProThis mudguard bracket for the Xiaomi M365 is a lightweight support for the rear mudguard of your electric scooter. The bracket holds the mudguard in the right position, stops it from hitting the road or the wheel and keeps the rear light cable away from the tyre. Compatible with the Xiaomi M365 and M365 Pro.A loose or broken rear mudguard is a well-known problem on the M365: the mudguard starts to vibrate, touches the wheel and eventually snaps off. With this mudguard bracket (also called a rear mudguard support) the mudguard is held firmly in place again, so mud and rainwater don't splash onto your clothes. You fit it using the existing bolts at the rear light.Benefits Keeps the rear mudguard stable in place Stops the mudguard from hitting the road or the wheel Keeps the rear light cable away from the tyre Reduces spray and mud on your clothes Fits with the existing rear light bolts Lightweight, you won't notice it while riding Specifications Brand ZenXstore (compatible with Xiaomi) Type Mudguard bracket / rear mudguard support Compatible with Xiaomi M365, Xiaomi M365 Pro Position Rear, at the rear light Mounting Using the existing rear light bolts EAN 8720387803231 Compatible with Xiaomi M365 Xiaomi M365 Pro Do you have a different model, such as a D8 with the same mudguard mounting? Send us a photo of the rear of your scooter first and we'll take a look with you.How to fit the mudguard bracket Switch off the scooter and unfold it on a stable surface. Unscrew the rear light screw. Attach the bracket using the existing bolts and refit the rear light. Check that the mudguard does not touch the wheel. What's in the box1x mudguard bracket for the electric scooterShipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsDoes this mudguard bracket fit the Xiaomi M365 Pro?Yes, the bracket is intended for the Xiaomi M365 and the M365 Pro.Do I need extra screws for fitting?No, you attach the bracket with the existing rear light bolts. All you need is a suitable Allen key.Why does the M365 rear mudguard break so quickly?The mudguard is only attached at the rear and vibrates over bumps. A mudguard bracket gives extra support so it moves less.Is this a complete mudguard?No, this is the bracket that supports the mudguard. If you are looking for a new rear mudguard with hook, take a look at our mudguard sets for the M365.Also take a look at the other parts and accessories for your electric scooter in our E-mobility collection.

Read more less

iPhone fast charger 20W with USB-C port and cableThis 20W iPhone fast charger is a compact USB-C adapter with a USB-C cable included, suitable for fast charging iPhones from the iPhone 8 onwards. At 20W, a compatible iPhone charges to around 50% in about 30 minutes. With a matching USB-C cable you can also fast-charge an iPad Pro.Ideal as an extra or replacement charger for home, work or your bag. The adapter is small and takes up little space at the socket. If you have an iPhone 15 or newer, use a USB-C to USB-C cable; for older iPhones with Lightning, use a USB-C to Lightning cable. Many people also search for this adapter as a 'fast charger' or 'USB-C charging plug'.Benefits 20W output for fast charging USB-C port, fits modern cables Around 50% in 30 minutes on iPhone 8 and newer USB-C cable included Compact size, handy on the go Can also be used for iPad and other USB-C devices Specifications Brand ZenXstore Type USB-C fast charger / charging plug Output 20W Adapter port USB-C Cable USB-C cable included Fast charging iPhone 8 and newer EAN 8720387803330 Compatible with iPhone 8, 8 Plus, X, XR, XS and SE (2nd and 3rd generation) iPhone 11, 12, 13 and 14 series (with USB-C to Lightning cable) iPhone 15 and newer (with USB-C to USB-C cable) iPad Pro and other devices that charge via USB-C What's in the box 1x 20W USB-C fast charger 1x USB-C cable Shipping and service Free shipping within the Netherlands Shipped from our own warehouse in Rosmalen (NL), no dropshipping Orders are processed within 1-2 working days; delivery in the Netherlands and Belgium usually within 2-3 working days 14-day cooling-off period Personal customer service via support@zenxstore.nl Frequently asked questionsHow fast does my iPhone charge with this 20W fast charger?An iPhone 8 or newer fast-charges to around 50% in about 30 minutes, depending on the model and battery condition.Which cable is included?A USB-C cable is included. If you want to be sure it fits your device, email us at support@zenxstore.nl.Does this fast charger work with the iPhone 15?Yes, the iPhone 15 and newer charge via USB-C. Use a USB-C to USB-C cable for this.Can I also charge my iPad with it?Yes, with a matching USB-C cable you can also charge an iPad, such as an iPad Pro.Also take a look at our other chargers and electronics.

Read more less